I had to use shims in both TR3s I restored - I wouldn't think it acceptable
to have the kink you describe.
Andrew Uprichard
-----Original Message-----
From: triumphs-bounces@autox.team.net
[mailto:triumphs-bounces@autox.team.net] On Behalf Of Angelo Graham
Sent: Monday, January 03, 2011 6:42 PM
To: triumphs@autox.team.net
Subject: [TR] TR2/3 gas tank alignment?
Hello List and Happy New Year to all:
Just finished installing the gas tank in my TR2 project and noticed that
when the straps are on the tank and all 4 bolts tightened, the filler
neck and tank spigot are out of line. There is a noticeable "kink" in
the rubber sleeve connecting the two. Is this OK?
If I slacken the front (longer) bolts, the necks come into alignment,
but it doesn't seem right to have exposed threads. I have used 1/4"
closed cell foam pads under the tank (lower and upper mounting surfaces).
Not sure if more foam should be used under the front of the tank or is
the misalignment of the tank and filler taken up by the rubber sleeve?
Thanks for any help and insight into this.
Angelo Graham
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Manage your account:
http://autox.team.net/mailman/options/triumphs/auprichard@uprichard.net
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|