triumphs
[Top] [All Lists]

Re: [TR] Interior vinyl installation question

To: <cfmtr3a@verizon.net>, "'TR List '" <triumphs@autox.team.net>
Subject: Re: [TR] Interior vinyl installation question
From: <wbeech@flash.net>
Date: Sat, 4 Jun 2011 11:54:35 -0600
I set the vinyl in front of the heater vent for about 5 minutes and it
stretched right onto the dash and cappings with no problems or fold marks.  

My biggest headache was the leather door capping, trying to finish off the
ends without denting the flimsy chrome end caps.

Bill
Bill Beecher
'58 TR-3A TS30766L  "Tarbaby"
www.triumphowners.com/1566
"A Triumph is man's best friend, it always comes when it is called...of
course, some times it is difficult to make it go"



-----Original Message-----
From: triumphs-bounces@autox.team.net
[mailto:triumphs-bounces@autox.team.net] On Behalf Of Carl TR
Sent: Saturday, June 04, 2011 9:07 AM
To: TR List 
Subject: [TR] Interior vinyl installation question

What is the consensus of the list about getting the wrinkles out of vinyl
before installation.

The vinyl has several 'in' and 'out' wrinkles where it was folded.   I tried
letting them sit in the Florida sun/heat yesterday but it had very little
effect.   Will they come out as I apply glue and stretch on the dash/cubby
door/capping pieces?  

Or do I try to steam them or iron them or something else such as wetting
them down before the sun/heat?

Thank you
Carl


triumphs@autox.team.net

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: http://autox.team.net/mailman/options/triumphs/wbeech@flash.net



Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs


http://www.team.net/archive

triumphs@autox.team.net

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums



Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>