I had another flasher unit I just put in and now the rear signals work with
the lights on, but not the front. Is there something not wired correctly, or
do I need to take both the fronts apart and clean and tighten the fitting? I
checked the connections and they all seem very tight where they connect to the
control head leads? The brightness of the two front bulbs also seems a bit dim
also when they are flashing, but the rears seem very bright? Thanks
Dave
----- Original Message -----
From: davewillner
To: triumphs@autox.team.net
Sent: Sunday, June 12, 2011 2:42 PM
Subject: TR3A turn signal question
New wiring harness installed, everything works well. I set up the driving
lamps, heater and fixed the connections to the wiper switch. The one problem I
do have is when the headlights are on the blinkers don't flash, when the
headlights are off they work fine, any thoughts? Thanks
Dave Willner
Stroudsburg PA
59 TR3A
70 MGB
70 BSA 441 VS
triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|