triumphs
[Top] [All Lists]

Re: [TR] Satin Black Powder coat

To: Dave1massey@cs.com
Subject: Re: [TR] Satin Black Powder coat
From: Don Hiscock <don.hiscock@gmail.com>
Date: Mon, 27 Jun 2011 16:06:29 +0200
Seems to me the comments about surface texture area a matter of degree.
 Gloss is a "micro" optical property.  Roughness is a "macro" surface
property.  Normal flatting agents in paints and coatings are designed to
disrupt the surface on the micro level to cut gloss without making a big
difference in macro roughness.

Not seeing the articles in discussion, it's hard for us to fully understand
the "bit of texture" observation.   I think if a lower gloss powder coat --
especially an only slightly lower gloss satin --- is giving a substantially
different surface texture, there's something else at work besides the
intended gloss level.

Don
TR3B TSF202L

On Mon, Jun 27, 2011 at 3:02 PM, <Dave1massey@cs.com> wrote:

> In a message dated 6/26/2011 8:08:54 PM Central Daylight Time,
> elliottr@rmi.net writes:
> > I have been using Eastwood's powder coating supplies some and have been
> > very happy with them.  But, after doing the last 3 pieces n satin black I
> > noticed that all of the items I have done in the satin black have a bit
> of
> > texture to them, while all of the other items seem to be very smooth.
> >
> > So I am wondering, is the satin black supposed to feel that way, or am I
> > doing something wrong.  I suspect that I am doing something wrong, though
> it
> > seems to only be affecting the satin black.  Any ideas?
> >
> Absolutely.  That's how they get the satin look.  It's the texture.  If you
> clearcoat over a satin or flat finish it will come out gloss.
>
> Dave
>
>
> triumphs@autox.team.net
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/don.hiscock@gmail.com


triumphs@autox.team.net

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>