triumphs
[Top] [All Lists]

[TR] TR3 oil cooler

To: yellowtr3@yahoo.com
Subject: [TR] TR3 oil cooler
From: William Brewer <wsb1960tr3a@att.net>
Date: Thu, 30 Jun 2011 17:36:34 -0700 (PDT)
     I put in an oil cooler awhile back. I bought the kind that goes between 
the filter head and the block. I bought it because it came with an integral 
thermostatic bypass valve for when the oil is cold. I took it off because it 
leaked and plan to put it back on someday. It made a big difference in oil 
pressure on hot days with a clapped out engine.
     I bought the filter from MOSS UK. The guy at LBCarCo picked it up for me 
on a parts trip to UK and had it shipped over somehow. Good service.
     Before that I had another oil cooler without a thermostatic bypass that 
went on the bottom of the filter head, but one cold winter day when I tried to 
start the car it tried to pump thick oil through the cooler and it all split 
open (the cooler, that is).
     My car runs at 185 F on the hottest day (a 114 day is the record so far!) 
and I am not really sure if a cooler is needed at this time.
     Good luck and let the list know what you come up with.

     Bill in Tehachapi

From: Frank Fisher <yellowtr3@yahoo.com>
To: triumphs@autox.team.net
Subject: [TR] TR3 oil cooler
Message-ID:
    <1309456078.61853.YahooMailRC@web120202.mail.ne1.yahoo.com>
Content-Type: text/plain; charset="us-ascii"

thinking of adding an oil cooler to my TR3.
looking at a few different kits.
im quite capable of figuring my own installation.
most appear to screw onto the filter assembly like the modern filter kit.
i have seen some that appear to go between the filter assembly and the block. i
think they look like they may perform better? yes/no?
was looking in the way back machine and Teriann talked of some ones kit. but
then i lost the link to your comment and cant find it again. doh!
recommendations?
thanks
Frank


triumphs@autox.team.net

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>