George;
The hole closest to the large gauge is for your heater fan speed control.
The outboard switch is for an overdrive switch.
Joe
-----Original Message-----
From: triumphs-bounces@autox.team.net
[mailto:triumphs-bounces@autox.team.net] On Behalf Of George
Sent: Friday, July 01, 2011 3:19 PM
To: triumphs@autox.team.net
Subject: [TR] Tr3 Dash Switches?
I purchased a used TR3 metal dash complete with instruments and switches
from e-bay. I bought the complete dash along with the glove box and
hardware for spare parts. I found that the dash has two factory made holes
just to the left of the Tach. There was an old toggle switch in one of the
holes on the left hand side and the other one was a bit larger hole but did
not have a switch or knob that was there originally. My Tr3 does not have
any switches or knobs on the left of the Tach. What are these holes for? I
assumed that the larger hole was maybe an overdrive switch but what was the
toggle switch for? I do not know if the toggle was an original part or not.
What is your best guess/
Puzzled. George M. 1960 TR3A Waleska Ga
triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|