triumphs
[Top] [All Lists]

Re: [TR] TR4 manifold Studs

To: Dave <dave@ranteer.com>
Subject: Re: [TR] TR4 manifold Studs
From: Darrell Walker <darrellw360@mac.com>
Date: Wed, 30 May 2012 19:04:20 -0700
Cc: triumphs@autox.team.net
Delivered-to: mharc@autox.team.net
Delivered-to: triumphs@autox.team.net
In-reply-to: <1466320D97AA455B976312687A5AAA03@ranteer.local>
List-archive: <http://autox.team.net/pipermail/triumphs>
List-help: <mailto:triumphs-request@autox.team.net?subject=help>
List-id: Triumph Sports car discussion <triumphs.autox.team.net>
List-post: <mailto:triumphs@autox.team.net>
List-subscribe: <http://autox.team.net/mailman/listinfo/triumphs>, <mailto:triumphs-request@autox.team.net?subject=subscribe>
List-unsubscribe: <http://autox.team.net/mailman/options/triumphs>, <mailto:triumphs-request@autox.team.net?subject=unsubscribe>
References: <19707870.77662.1338412449381.JavaMail.root@vznit170060> <1466320D97AA455B976312687A5AAA03@ranteer.local>
Sender: triumphs-bounces@autox.team.net
On May 30, 2012, at 6:04 PM, Dave wrote:

> I picked up a TR4 with a header.   as such, the manifold studs are really too 
> long and have too big a shoulder.  there were some interesting spacers 
> holding the whole thing together.
> 
> can I just get shorter ones some where?  do they have to be special in some 
> way?

Not all of the studs are the same length, so you could source some of he 
shorter ones.

But is the flange on the header thinner than the one on the intake?  If so, you 
will want to use some kind of spacer between the thinner flange and the clamps, 
otherwise they won't seal the manifold very well.

I drilled and tapped the clamp on the end for the thinner manifold, and 
threaded in a screw with the appropriate thickness head to make up the 
difference.

-Darrell

-- 
Darrell Walker
66 TR4A IRS-SC CTC67956L
81 TR8 SATPZ458XBA406206
Vancouver, WA, USA

** triumphs@autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: 
http://autox.team.net/mailman/options/triumphs/mharc@autox.team.net

<Prev in Thread] Current Thread [Next in Thread>