triumphs
[Top] [All Lists]

Re: [TR] A/C

To: triumphs@autox.team.net, Robert Jones <rjones@wfeca.net>
Subject: Re: [TR] A/C
From: Randall <tr3driver@ca.rr.com>
Date: Tue, 9 Oct 2012 21:01:24 -0400
Authentication-results: cdptpa-omtalb.mail.rr.com smtp.user=tr3driver@ca.rr.com; auth=pass (LOGIN)
Delivered-to: triumphs-archive@autox.team.net
Delivered-to: triumphs@autox.team.net
List-archive: <http://autox.team.net/pipermail/triumphs>
List-help: <mailto:triumphs-request@autox.team.net?subject=help>
List-id: Triumph Sports car discussion <triumphs.autox.team.net>
List-post: <mailto:triumphs@autox.team.net>
List-subscribe: <http://autox.team.net/mailman/listinfo/triumphs>, <mailto:triumphs-request@autox.team.net?subject=subscribe>
List-unsubscribe: <http://autox.team.net/mailman/options/triumphs>, <mailto:triumphs-request@autox.team.net?subject=unsubscribe>
Sender: triumphs-bounces@autox.team.net
Sensitivity: Normal
---- Robert Jones <rjones@wfeca.net> wrote: 
> Question:  Should the
> expansion valve be installed before flushing?  Is flushing worth it?  If so,
> any recommended solvent?  Wouldn't the new dryer be installed after flushing
> and before evac and filling with freon?

No need for flushing, IMO.  That's for when you've had a compressor failure 
that dumped garbage in the system, or have too much oil or something.

If you do flush, don't flush through either the receiver/dryer or the expansion 
valve.  Disconnect the evaporator and condenser and flush them independently.  
And unless you flush with refrigerant, be darn sure to get all of the solvent 
back out.

Randall

** triumphs@autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: 
http://autox.team.net/mailman/options/triumphs/triumphs-archive@autox.team.net

<Prev in Thread] Current Thread [Next in Thread>
  • Re: [TR] A/C, Randall <=