Re: [TR] Stupid, stupid

[terryrs@comcast.net]

I did this repair on one of mine.  My screw in "nut" was countersunk, so I just 
sight drilled a bevel with a bigger drill bit...very carefully.  The chrome 
screw "nut" blends in exactly as Randall says.  Do be careful of the glass, but 
I didn't have a problem.

Terry Smith, '59 TR3A  TS 58667
New Hampshire

>There is a special Tenax stud that was originally used only on aluminum 
>frames.  It doesn't thread into the frame at all, instead it passes all the 
>way through and > has a slotted flathead "nut" that comes in from the other 
>side.  Only noticeable if you look for it, and not objectionable then, IMO.  I 
>haven't tried it yet, but >I am planning to use one of them to 'repair' a 
>stripped hole in my original windshield frame.

** triumphs@autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: 
http://autox.team.net/mailman/options/triumphs/triumphs-archive@autox.team.net