I went through a similar exercise with my '71 Stag. In addition to the 4
wires + spare I have a handful of spare hubs and wheels they all show some
play, but I minimized them by swapping hubs and wheel combinations.
As much as I like my Stag with wire wheels, when they really show signs of
major wear, I'll for for something after market/ way cheaper.
Sujit
On Mon, Feb 11, 2013 at 8:54 PM, TeriAnn J. Wakeman <tjwakeman@gmail.com>wrote:
> On 2/4/13 6:19 PM, Gary Nafziger wrote:
>
>> wondering if there is a way to measure "play" in used wire wheel adaptors
>> when
>> attached to new wire wheels? I have some used adaptors and would like to
>> use
>> them on new wheels but am aware of the danger of doing this. I'm just
>> wondering if a person could mount them and then test the "play" and if
>> that
>> would be a valid test?
>>
>> Has anyone "been there done that"?
>>
>> First there should be absolutely no play.
>
> Second, the condition of a hub spline can be checked visually. The
> individual splines on a like new hub do not come to a point. There is a
> flat area at the top. If the splines come to a sharp point they are badly
> worn. It the point is tilted a little to one side they are desperately
> worn. Compare the part of the spline that the wheel does not ride against
> with the part that engages the wheel and look for wear.
>
> TeriAnn
>
>
> ** triumphs@autox.team.net **
>
> Donate: http://www.team.net/donate.**html<http://www.team.net/donate.html>
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/**
> options/triumphs/triumphstag@**gmail.com<http://autox.team.net/mailman/options/triumphs/triumphstag@gmail.com>
>
--
Sujit Roy, Realtor
Cupertino, CA
(408) 839-8359
** triumphs@autox.team.net **
Archive: http://www.team.net/archive
|