Has to be a short or weak connnection in the holder. Have you tried one of
the new holders in that position?
Bill
-----Original Message-----
From: triumphs-bounces@autox.team.net
[mailto:triumphs-bounces@autox.team.net] On Behalf Of Carl TR
Sent: Sunday, March 31, 2013 2:04 PM
To: triumphs@autox.team.net
Subject: [TR] panel lights on TR3
I am pulling my hair. (not out - I need all I have)
Installed the 6 panel lamps on the '3 yesterday.
Two circuits - one with 4 holders/bulbs for speedo/tach, the other with two
holders/bulbs for center panel
Bench tested all six at one time - all ok.
Problem - one holder/lamp in the center panel pair - when installed causes
everything to flicker. I unplug the offending holder/lamp and no flicker.
I connect a ground and it is back.
Switched out for an older holder/lamp - same thing.
Switched the lamps around - same thing. Same location.
Not sure it matters but It is the center panel lamp below the turn signal
indicator.
Any ideas.
Carl
1961 Triumph TR3A - TS81802LO
<http://mysite.verizon.net/cfmtr3a/> http://mysite.verizon.net/cfmtr3a/
Tampa, FL
** triumphs@autox.team.net **
Archive: http://www.team.net/archive
http://autox.team.net/mailman/options/triumphs/wbeech@flash.net
** triumphs@autox.team.net **
Archive: http://www.team.net/archive
|