Got my gearbox put back together tonight...as I was putting the seal
in the front housing, I noticed that the flange between the seal and
the housing had a crack in it. I dont' know if it was there already
(I didn't see it when I cleaned it) or if I put it there while
knocking the seal into the housing...
See http://fishplate.org/vehicles/tr6/gearbox/gearbox_seal.jpg
I'm not sure what function that flange performs, but I can imagine the
destruction if it broke off. Anyone got a good used front seal
housing for a late TR6 gearbox?
TIA,
Jeff Scarbrough
Corrosion Acres, Ga.
** triumphs@autox.team.net **
Archive: http://www.team.net/archive
|
