triumphs
[Top] [All Lists]

Re: [TR] Starter solenoid mounting location on a TR4

To: Brad Kahler <bkahler1@gmail.com>
Subject: Re: [TR] Starter solenoid mounting location on a TR4
From: Geo Hahn <ahwahneetr@gmail.com>
Date: Fri, 22 Aug 2014 10:43:53 -0700
Cc: Triumphs <Triumphs@autox.team.net>
Delivered-to: mharc@autox.team.net
Delivered-to: triumphs@autox.team.net
References: <CADm3DLFHcNcsO=jwUDxKr-RUhHt-5SJBJYzURDwu_-_y7+4dvQ@mail.gmail.com> <8D18C33E08B28CB-63CC-14F9E@webmail-m248.sysops.aol.com> <CADm3DLFf6VWAAn1P34WNmFWEZ-hy_2HN6dut3tnR3fK4L+WYcQ@mail.gmail.com>
Whatever you end up doing, bear in mind that the solenoid needs to be
grounded by its mounting.  If the body/bracket is not getting a good ground
it will not operate.

Geo


On Fri, Aug 22, 2014 at 10:26 AM, Brad Kahler <bkahler1@gmail.com> wrote:

> Andy,
>
> I'm betting you remembered exactly where to find that service bulletin :)
>
> It is relevant to my car but for the moment I'll leave it in the original
> location.  I never realized that mine had a round golf cart style of
> solenoid which also had a different spacing than the lucas solenoid. On top
> of that some po used a sheet metal screw in the top hole and the solenoid
> was covering the bottom hole. I have a used lucas solenoid that I am going
> to try and I was also successful in retapping the original mounting holes.
>  Now I just hope that old solenoid is still good!
>
> I find it interesting that Triumph didn't want to pay the service shop
> anything extra to move the solenoid 4" to the right.  I wonder if that
> logic would work with current factory service shops.
>
> Thanks!
>
> Brad
>
>
> On Fri, Aug 22, 2014 at 11:21 AM, Andrew S. Mace <zoboherald@aol.com>
> wrote:
>
> >  There was a Service Bulletin on this topic, T-64-32, a copy of which may
> > be found at
> >
> > <http://www.tr3a.info/PDFs/1964.pdf>
> >
> > It involved moving the solenoid to the right to avoid possible seepage
> > from the rear carburetor. This may or may not be relevant to your
> > particular car?
> >
> >  --Andy Mace
> >
> > *Mrs Irrelevant: Oh, is it a jet?
> > *Man: Well, no ... It's not so much of a jet, it's more your, er, Triumph
> > Herald engine with wings.
> > -- Cut-price Airlines Sketch, Monty Python's Flying Circus (22)
> >
> > Triumph 10 / Herald / Sports 6 vehicle consultant, The Vintage Triumph
> > Register: http://www.vtr.org
> >
> > Check out the North American Triumph Sports 6 (Vitesse 6) and Triumph
> > Herald Database: http://triumph-herald.us
> >
> >
> >  -----Original Message-----
> > From: Brad Kahler <bkahler1@gmail.com>
> > To: Triumphs <Triumphs@autox.team.net>
> > Sent: Fri, Aug 22, 2014 10:24 am
> > Subject: [TR] Starter solenoid mounting location on a TR4
> >
> >  My 63 TR4 came with the starter solenoid (round with pushbutton)
> mounted on
> > the front of the firewall near the rear carburetor.  It currently only
> has
> > one screw holding it in place and it just seems like an odd location.
> >
> > Could someone possibly send me a picture of where the solenoid is
> actually
> > supposed to be installed?
> >
> > Thanks!
> >
> > Brad
> >
> > ** triumphs@autox.team.net **
> >
> > Donate: http://www.team.net/donate.html
> > Archive: http://www.team.net/archive
> > Forums: http://www.team.net/forums
> > Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/zoboherald@aol.com
>
> ** triumphs@autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/ahwahneetr@gmail.com

** triumphs@autox.team.net **

Archive: http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>