triumphs
[Top] [All Lists]

Re: [TR] Triumphs Digest, Vol 8, Issue 32

To: triumphs@autox.team.net
Subject: Re: [TR] Triumphs Digest, Vol 8, Issue 32
From: "TeriAnn J. Wakeman" <tjwakeman@gmail.com>
Date: Sat, 07 Feb 2015 08:08:51 -0700
Delivered-to: mharc@autox.team.net
Delivered-to: triumphs@autox.team.net
References: <mailman.14.1423249203.23401.triumphs@autox.team.net> <E18A7035-B988-4BF7-A06D-890595163202@sbcglobal.net>
User-agent: Mozilla/5.0 (Macintosh; Intel Mac OS X 10.10; rv:31.0) Gecko/20100101 Thunderbird/31.4.0
On 2/6/15 8:14 PM, john-marie@sbcglobal.net wrote:
> TeriAnn and Randall,
> Thanks for your responses and suggestions.  Was leaning toward leaving the 
> strap between engine and frame but will need to consider your suggestions.  
> I'm pretty much a 'put it back like it was' guy so don't usually look for 
> ways to improve.  Thanks again.
> John

OK.  But if your starter turns slower than it should the first place to 
look is a bad starter ground.  With a freshly painted engine block and 
freshly painted starter motor I was not getting a good ground path and 
the starter did not want to turn quickly when it was cold.  Placing the 
ground strap on a starter mounting bolt did wonders. for morning cold 
starts.

TeriAnn
> Sent from my iPad
>
>> On Feb 6, 2015, at 1:00 PM, triumphs-request@autox.team.net wrote:
>>
>> Send Triumphs mailing list submissions to
>>     triumphs@autox.team.net
>>
>> To subscribe or unsubscribe via the World Wide Web, visit
>>     http://autox.team.net/mailman/listinfo/triumphs
>> or, via email, send a message with subject or body 'help' to
>>     triumphs-request@autox.team.net
>>
>> You can reach the person managing the list at
>>     triumphs-owner@autox.team.net
>>
>> When replying, please edit your Subject line so it is more specific
>> than "Re: Contents of Triumphs digest..."
>>
>>
>> Today's Topics:
>>
>>    1. TR4A engine ground strap (john-marie@sbcglobal.net)
>>    2. Re: TR4A engine ground strap (TeriAnn J. Wakeman)
>>    3. Re: TR4A engine ground strap (Randall)
>>
>>
>> ----------------------------------------------------------------------
>>
>> Message: 1
>> Date: Thu, 5 Feb 2015 21:45:10 -0600
>> From: john-marie@sbcglobal.net
>> To: "triumphs@autox.team.net" <triumphs@autox.team.net>
>> Subject: [TR] TR4A engine ground strap
>> Message-ID: <EF37B8F6-6C4E-4EE4-9746-53D6C3CAC844@sbcglobal.net>
>> Content-Type: text/plain;    charset=us-ascii
>>
>> Hello List,
>> Am reassembling my TR4A and trying to sort out the correct attachment points 
>> for the engine ground strap.  I have a 2 1/2 inch 3/8-24 bolt with two nuts, 
>> a lock washer and 2 star washers that I labeled "engine ground" on 
>> disassembly.  Now I can't figure out where it goes.  My photos show the 
>> ground attached to a timing chain cover bolt and the other end to the shock 
>> tower in an extra bolt hole where the cross tube attaches.  And that is 
>> where the old strap wants to be.  The hole in the shock tower is about an 
>> inch deep, so simple enough to secure the strap there.  Just don't know 
>> where the 2 1/2" bolt with 2 nuts goes.  Could be I mislabeled it.  Any 
>> enlightenment will be appreciated.
>> Lesson learned...be more specific when bagging and labeling.
>> John DeLuca
>>
>> Sent from my iPad
>>
>> ------------------------------
>>
>> Message: 2
>> Date: Fri, 06 Feb 2015 06:49:57 -0700
>> From: "TeriAnn J. Wakeman" <tjwakeman@gmail.com>
>> To: triumphs@autox.team.net
>> Subject: Re: [TR] TR4A engine ground strap
>> Message-ID: <54D4C685.1030104@gmail.com>
>> Content-Type: text/plain; charset="utf-8"; Format="flowed"
>>
>> I'm a fan of functionality over how the previous owner had things. I
>> think the best place for a ground strap is between one of the starter
>> motor mounting bolts and the frame adjacent to that bolt. you want that
>> starter motor to have the best electrical connections that it can have.
>>
>> TeriAnn
>>
>>> On 2/5/15 8:45 PM, john-marie@sbcglobal.net wrote:
>>> Hello List,
>>> Am reassembling my TR4A and trying to sort out the correct attachment 
>>> points for the engine ground strap.  I have a 2 1/2 inch 3/8-24 bolt with 
>>> two nuts, a lock washer and 2 star washers that I labeled "engine ground" 
>>> on disassembly.  Now I can't figure out where it goes.  My photos show the 
>>> ground attached to a timing chain cover bolt and the other end to the shock 
>>> tower in an extra bolt hole where the cross tube attaches.  And that is 
>>> where the old strap wants to be.  The hole in the shock tower is about an 
>>> inch deep, so simple enough to secure the strap there.  Just don't know 
>>> where the 2 1/2" bolt with 2 nuts goes.  Could be I mislabeled it.  Any 
>>> enlightenment will be appreciated.
>>> Lesson learned...be more specific when bagging and labeling.
>>> John DeLuca
>>>
>>> Sent from my iPad
>>>
>>> ** triumphs@autox.team.net **
>>>
>>> Donate: http://www.team.net/donate.html
>>> Archive: http://www.team.net/archive
>>> Forums: http://www.team.net/forums
>>> Unsubscribe/Manage: 
>>> http://autox.team.net/mailman/options/triumphs/tjwakeman@gmail.com
>> -------------- next part --------------
>> An HTML attachment was scrubbed...
>> URL: 
>> <http://autox.team.net/pipermail/triumphs/attachments/20150206/22fcffec/attachment-0001.html>
>>
>> ------------------------------
>>
>> Message: 3
>> Date: Fri, 6 Feb 2015 09:00:09 -0800
>> From: "Randall" <TR3driver@ca.rr.com>
>> To: <triumphs@autox.team.net>
>> Subject: Re: [TR] TR4A engine ground strap
>> Message-ID: <33.BC.24266.213F4D45@cdptpa-oedge03>
>> Content-Type: text/plain;    charset="us-ascii"
>>
>>> I'm a fan of functionality over how the previous owner had
>>> things. I think the best place for a ground strap is between
>>> one of the starter motor mounting bolts and the frame
>>> adjacent to that bolt. you want that starter motor to have
>>> the best electrical connections that it can have.
>> If you are going to modify, why not run the ground cable directly from the 
>> battery to the starter?  Later cars even had an extra
>> connector, so the same cable attaches to both engine and body.  That way the 
>> starter current doesn't run through the body at all.
>>
>> -- Randall
>>
>>
>>
>> ------------------------------
>>
>> Subject: Digest Footer
>>
>> _______________________________________________
>>
>> Triumphs mailing list
>> Triumphs@autox.team.net
>> http://autox.team.net/mailman/listinfo/triumphs
>>
>>
>> ------------------------------
>>
>> End of Triumphs Digest, Vol 8, Issue 32
>> ***************************************
> ** triumphs@autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/triumphs/tjwakeman@gmail.com
>


** triumphs@autox.team.net **

Archive: http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>