Mine bounced around too, but not that much. The dizzy had about 30K miles on
it and the bushing seemed good. A pertronix helped a little.
The biggest improvement to my idol was switching to a push-in style distributor
cap? It still has a slight miss but it is barely detectable. I suspect leaky
valve guides because it tends to smoke a little at idle and immediately after
start up.
Let me/us know how the repaired distributor functions when you get it back.
Does it make the timing light more stable?
-Tony
Sent from my iPhone
> On Jul 10, 2015, at 2:00 PM, triumphs-request@autox.team.net wrote:
>
> Date: Thu, 9 Jul 2015 18:40:10 -0700
> From: "John & Pat Donnelly" <pdonnel1@san.rr.com>
> To: <triumphs@autox.team.net>
> Cc: 'Ann and Tim Buja' <thebujas@comcast.net>
> Subject: Re: [TR] Is My Distributor Worn Out?
> Message-ID: <005e01d0bab1$5c5f94d0$151ebe70$@rr.com>
> Content-Type: text/plain; charset="us-ascii"
>
> Tim,
>
> This was a god-send. Today after work I broke out the timing light and the
> electronic tachometer and performed your tests.
>
> The vacuum advance works fine, but boy does the timing mark bounce back and
> forth erratically. About an 1/8" to 3/16" at 1000 RPM. Or about 6-8 degrees
> I'm guessing. I've been fighting a rough idle for so long and now I know
> what it is. OK, I'm off to the Advanced Distributor website.
** triumphs@autox.team.net **
Archive: http://www.team.net/archive
|