Andrew
Did you bench bleed the master?
Greg
Sent from my iPhone - please excuse the brevity
> On Nov 1, 2015, at 6:59 AM, Andrew Uprichard <auprichard@uprichard.net> wrote:
>
> TeriAnn: I am thinking it has to be air, so I will try what you suggest.
> Thanks!
>
> Andrew
>
> -----Original Message-----
> From: Triumphs [mailto:triumphs-bounces@autox.team.net] On Behalf Of TeriAnn
> J. Wakeman
> Sent: Sunday, November 01, 2015 9:30 AM
> To: triumphs@autox.team.net
> Subject: Re: [TR] Any suggestions ?
>
>
>
>> On 11/1/15 5:05 AM, Andrew Uprichard wrote:
>> On the first pus, the slave pushrod doesn't move enough to fully
>> disengage, but the second push is fine (rod moves probably a quarter-inch
> more).
>>
>> Bled the line at the master cylinder, but that didn't help. The
>> master had been rebuilt, so I replaced it with a new one: the slave
>> was new from the get-go.
> Did you try Tony's suggestion? And you have a new flex line as well right?
> One thing I learned to do is to blow through a new rubber flex line before
> installing it. Once I bought one that had a fitting crimp that was so tight
> it completely closed off the inside of the hose. So it is conceivable that
> a crimp has almost closed off the hose. And some systems seem to really
> love retaining bubbles. For those a pressure bleed is the only way to get
> them all out.
>
> TeriAnn
>
> ** triumphs@autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/auprichard@uprichard.net
>
>
> ** triumphs@autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/tr4boy@att.net
** triumphs@autox.team.net **
Archive: http://www.team.net/archive
|