triumphs
[Top] [All Lists]

Re: [TR] TR4A - Windshield Wiper Slipping

To: "G.D. Huggins" <gdhuggins@genfiniti.com>, "Triumph List" <triumphs@autox.team.net>
Subject: Re: [TR] TR4A - Windshield Wiper Slipping
From: "Jerry Van Vlack" <jerryvv@roadrunner.com>
Date: Fri, 2 Sep 2016 20:16:36 -0400
Delivered-to: mharc@autox.team.net
Delivered-to: triumphs@autox.team.net
Importance: Normal a=MHmW6GTZalfECKXbHLPkRQ==:117 a=MHmW6GTZalfECKXbHLPkRQ==:17 a=L9H7d07YOLsA:10 a=9cW_t1CCXrUA:10 a=s5jvgZ67dGcA:10 a=IkcTkHD0fZMA:10 a=doupyKFmAAAA:8 a=mBRpi4aF-O7vEAucaq8A:9 a=QEXdDO2ut3YA:10 a=PnVOTTmvsOeot2Fdb9eX:22
References: <2E034B1B-E714-49FD-9420-D481DEC2361E@genfiniti.com>
I've had the exact same issue with the reproduced wheel boxes and or the 
wiper arms both replaced during my restoration. I am aware of a friends 
TR250 with the issue after his restoration too.

I wrapped some aluminum foil around the wheel box and hope that helps. Wrote 
to TRF but no response. Frustrated.

JVV

-----Original Message----- 
From: G.D. Huggins
Sent: Friday, September 2, 2016 10:27 AM
To: Triumph List
Subject: [TR] TR4A - Windshield Wiper Slipping

All,

First of all, I am coming up on five years of driving the car after the 8 
year restoration project.
The advice and help I got through this forum was instrumental to getting her 
back on the road.
Thanks again to all of you.

I am experiencing a new issue that I hope you can help with.
I replaced one of the windshield wiper mounts, and both wiper arms, during 
the restoration.
At first, everything worked great.
But now the wiper arm mounted to the new mounting â??slips" when traveling up 
the windshield, but stays â??locked" when going down.
The effect is that the arm eventually ends up on the bonnet, doing a great 
job of keeping it free of water!

I tried placing various things (teflon tape, rubber glove finger tips, etc.) 
between the arm and mount in an attempt to create a tension great enough to 
keep it from slipping, but to no avail.
My guess is that the splines in either the mounting wheel, and/or the wiper 
arm, have become quickly worn, but somehow only in one direction?!?

Has anyone had this issue?  If so, what was the fix.
If I replace the arm and/or the mount, what vendor should I buy from? 
Avoid?



Cheers,

Guy D. Huggins
1965 Triumph TR4A
CTC 63569LO

@roadrunner.com 


** triumphs@autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: 
http://autox.team.net/mailman/options/triumphs/mharc@autox.team.net
<Prev in Thread] Current Thread [Next in Thread>