I just remembered the Stag has a spacer or adapter plate between the bell
housing and the engine block. The 3/8 holes in the bell housing to adapter are
at 2:30 and 11:00.
The adapter to engine block has two 3/8 holes in the middle at 3:00 and 9:00.
These might be 3/8 bolts with a shoulder. I don't have a Stag manual any more
to check. I let it go with the car.
Sometimes it takes awhile for the mind to get in gear. Have not worked on a
Stag in a long time.
Dean
Dean Tetterton
tr3a58 at verizon.net
-----Original Message-----
From: Sujit Roy <triumphstag at gmail.com>
To: Triumphs <triumphs at autox.team.net>
Sent: Fri, Mar 30, 2018 7:42 pm
Subject: [TR] Need help sourcing special gearbox to engine alignment bolts
The Stag has 2 special machined alignment bell housing bolts. I'm assuming the
TR6 and other Triumph used similar. Are these available anywhere?
Sujit
--
Sujit Roy
Cupertino, California
https://triumphstagblog.wordpress.com/
** triumphs at autox.team.net **
Archive: http://www.team.net/archive
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/triumphs/attachments/20180330/c4b19889/attachment.html>
|