triumphs
[Top] [All Lists]

[Fot] Has anybody ran these new brake calipers?

Subject: [Fot] Has anybody ran these new brake calipers?
From: kaskastner at gmail.com (Kas Kastner)
Date: Fri, 9 Mar 2018 07:44:25 -0800
References: <CACZdCPXM-BEj2p2-P8d+acF+_hzNYN=RqGNmcHdu2y9k=p7FCg@mail.gmail.com> <5D3AFB4D-C6F8-490A-8208-12C4A604FA08@me.com> <CACZdCPVXF1T3pf3-qkioDquO2we8P-6-vdRoT471ZdWMq5J48w@mail.gmail.com> <496193370.404774.1520483083250@connect.xfinity.com> <ecca85f62de80b5889e447f64735f075@tr4racer.com> <1322324899.177432.1520525397543@connect.xfinity.com> <39824744-DEB7-48F7-94BA-343E99425A24@me.com> <1346618642.364769.1520526467307@connect.xfinity.com> <00b501d3b702$8aed9540$a0c8bfc0$@gmail.com> <141E5239-4C18-4225-AE0E-BFE10DB690DC@att.net> <CAMJWJcGaN_PTNjed3Hzaqs6vO23P72VsUFxmLgvthgLPQqOW1w@mail.gmail.com> <8B196567-7CEA-420C-9D89-7CAE21DE320E@aol.com> <CAGiQU1CHBg3vd8tN+-1Efg43xLJ=0Sg+kn6=5k-_vijEmWmVvg@mail.gmail.com>
Just to finish off on the old time regulations and tires. Tires were never
questioned.  Use any tire that passed the safety regulation.  BUT, the
wheel rims were checked. You were only allowed 1/2" over the stock rim
width and we never cared what kind of tire you put that rim. Seems  lot
more logical. I still have the big sheet aluminum calipers I made so that
rim width could be check quickly without dismounting the wheel from the car
or even jacking up. Certainly seems a lot more simple compared to trying to
keep up with tire companies decide to do or when a certain brand was made
or used or outlawed or what size was fitted to what car in the past.

*Never be beaten by equipment.*

On Thu, Mar 8, 2018 at 9:46 PM, Kas Kastner <kaskastner at gmail.com> wrote:

> In the 50's to early 70's days of the California Sports Car Club, if you
> were caught, and many were, with parts or items that were not allowed you
> were given a chance to defend yourself at the Contest Board meeting (once a
> month) and if they found proof you were guilty as charged, you lost your
> license for a YEAR. That's it, you did not race for a year in any class.
>
> I ran the Rules Enforcement group and was on the Contest Board which
> consisted of current drivers in several classes. It was found most of the
> cheating took place from about 6th  place back to about 10th place. Nothing
> much before that position or after the 10th place. Some entrants never
> understood that other drivers REALLY were FAST and thus they thought the
> leaders were the cheaters and that just was not true at all. Interesting.
> No one wanted to have the name "cheater" attached to their name. Several
> cars were checked each race by lottery for cubic capacity, weight, gears
> ratios, body panels and other major parts. It was pretty pure racing.
>
> *Never be beaten by equipment.*
>
> On Thu, Mar 8, 2018 at 6:59 PM, Bill Dentinger via Fot <fot at autox.team.net
> > wrote:
>
>> Good for SVRA. If I were the Vintage Grand Poo Pah, I would take a note
>> of tire cheaters on the False Grid, and then bring em in with a Meat Ball
>> Flag after one lap in the Feature Race.
>>
>> Bill Dentinger
>>
>> PS Three sets of tires needed.  One for qualifying...one for the feature
>> race...and a special set for Tech. That latter set can be experienced, but
>> must have a minimum tread depth.
>>
>>
>> Sent from my iPhone
>>
>> On Mar 8, 2018, at 2:08 PM, John Styduhar via Fot <fot at autox.team.net>
>> wrote:
>>
>> The only item that SVRA regularly checks is tires from my experience.
>> And they do that at each gridding.
>>
>> On Thu, Mar 8, 2018 at 2:49 PM, Paul Ricco via Fot <fot at autox.team.net>
>> wrote:
>>
>>> We have not had issues with stock calipers.  We run Hawk or Carbotech
>>> brake pads and good brake fluid.  We do bleed the brakes regularly and all
>>> seems to be working good.
>>>
>>> It would be nice to get the benefit of less unsprung weight on the front
>>> suspension by switching to aluminum.  However, I do not know of any vintage
>>> organization that really allows it by their rules.  We all know that that
>>> do not get enforced on a regular basis.  However, I do think SVRA has made
>>> a great effort to get people to use a stock type caliper at their events.
>>>
>>> Paul
>>>
>>>
>>> On Mar 8, 2018, at 11:26 AM, Chris Marx via Fot <fot at autox.team.net>
>>> wrote:
>>>
>>> I?m still using the original brakes the car came with.
>>> I?ve put in some nice brake pads and that is working well for me.
>>>
>>> Cheers
>>> Chris
>>>
>>> *Von:* Fot <fot-bounces at autox.team.net> *Im Auftrag von *DAVE HOGYE via
>>> Fot
>>> *Gesendet:* Donnerstag, 8. M?rz 2018 17:28
>>> *An:* Scott Janzen <sjanzen at me.com>
>>> *Cc:* Friends of Triumph' Triumph <fot at autox.team.net>
>>> *Betreff:* Re: [Fot] Has anybody ran these new brake calipers?
>>>
>>> Good call, Scott.  The Wilwood calipers are aluminum, but otherwise look
>>> very similar to the the P or PB calipers.
>>>
>>> DH
>>>
>>> On March 8, 2018 at 8:21 AM Scott Janzen <sjanzen at me.com> wrote:
>>>
>>> good to check your club rules first though, if enforced.  VRG says you
>>> need to use the original equipment, and SVRA says
>>> Alternate calipers or wheel cylinders must be of the same material,
>>> design and number of pistons as the original component. There must be no
>>> increase in the frictional surface of the pads or shoes.
>>>
>>> On Mar 8, 2018, at 11:09 AM, DAVE HOGYE via Fot <fot at autox.team.net>
>>> wrote:
>>>
>>> The quality of the new calipers is somewhat suspect, but seem to work as
>>> needed.
>>> The first pair that I bought from BPNW had a yellow (anodized ?) finish
>>> with numbers in the castings.  The second pair from BPNW 4 years later have
>>> a silver finish and no numbers in the casting which made me wonder about
>>> the quality.
>>> My first set has been on my car from 2013.  13 race weekends a total of
>>> 3,800 miles.
>>> Wilwood makes beautiful replacements now.  They are anodized black.  I
>>> far as I can tell, they will fit our Triumphs, but haven't made a complete
>>> comparison.  Of course the price is higher, but more equivalent to the
>>> importance of good brakes.
>>>
>>> DH
>>>
>>> On March 8, 2018 at 2:54 AM Henry Frye via Fot <fot at autox.team.net>
>>> wrote:
>>>
>>>
>>> I have seen these available for a while now, but fear they are made
>>> somewhere we don't want to know from materials I don't want to think
>>> about. I'm not brave enough to put one of these on a street car, let
>>> alone my race car.
>>>
>>> Has anybody tried these calipers yet? Any feedback???
>>>
>>> As long as good cores are available for 16P's, I'm rebuilding OEM
>>> calipers.
>>>
>>> Henry
>>>
>>> On 2018-03-07 23:24, DAVE HOGYE via Fot wrote:
>>>
>>>
>>> BTW, the PB calipers are available new for around $100 each new.
>>> That's pretty inexpensive for such an important part.  I purchased
>>> another set when I thought I might be having a problem, but ended up
>>> just changing pads.  I'm glad to have a new pair standing by.  Then I
>>> can rebuild at my leisure.
>>>
>>> _______________________________________________
>>> fot at autox.team.net
>>>
>>> http://www.fot-racing.com
>>>
>>> Donate: http://www.team.net/donate.html
>>> Archive: http://www.team.net/archive
>>> Forums: http://www.team.net/forums
>>> Unsubscribe/Manage: http://autox.team.net/mailman/options/fo
>>> t/dlhogye at comcast.net
>>>
>>> _______________________________________________
>>> fot at autox.team.net
>>>
>>> http://www.fot-racing.com
>>>
>>> Donate: http://www.team.net/donate.html
>>> Archive: http://www.team.net/archive
>>> Forums: http://www.team.net/forums
>>> Unsubscribe/Manage: http://autox.team.net/mailman/options/fo
>>> t/sjanzen at me.com
>>>
>>>
>>>
>>> _______________________________________________
>>> fot at autox.team.net
>>>
>>> http://www.fot-racing.com
>>>
>>> Donate: http://www.team.net/donate.html
>>> Archive: http://www.team.net/archive
>>> Forums: http://www.team.net/forums
>>> Unsubscribe/Manage: http://autox.team.net/mailman/options/fo
>>> t/paulricco at att.net
>>>
>>>
>>>
>>> _______________________________________________
>>> fot at autox.team.net
>>>
>>> http://www.fot-racing.com
>>>
>>> Donate: http://www.team.net/donate.html
>>> Archive: http://www.team.net/archive
>>> Forums: http://www.team.net/forums
>>> Unsubscribe/Manage: http://autox.team.net/mailman/
>>> options/fot/johnstydo at gmail.com
>>>
>>>
>>>
>>>
>> _______________________________________________
>> fot at autox.team.net
>>
>> http://www.fot-racing.com
>>
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe/Manage: http://autox.team.net/mailman/
>> options/fot/billdentin at aol.com
>>
>>
>>
>> _______________________________________________
>> fot at autox.team.net
>>
>> http://www.fot-racing.com
>>
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe/Manage: http://autox.team.net/mailman/
>> options/fot/kaskastner at gmail.com
>>
>>
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
<http://autox.team.net/pipermail/fot/attachments/20180309/4928705f/attachment.html>

<Prev in Thread] Current Thread [Next in Thread>