triumphs
[Top] [All Lists]

[Fot] Competition Valve Cover Fastener-Redesign

Subject: [Fot] Competition Valve Cover Fastener-Redesign
From: bschirano at yahoo.com (Brian Schirano)
Date: Tue, 27 Mar 2018 21:59:40 +0000 (UTC)
References: <492EAD5F-30E1-4E63-8971-6497FD53A27D@cs.com>
Hi Joe - why would these not work on a GT6?
26A GT6+, 28 TR6Brian Schirano
585-305-0349 Cell?
BSchirano at yahoo.com 

    On Tuesday, March 27, 2018, 5:03:03 PM EDT, Joe Alexander via Fot <fot at 
autox.team.net> wrote:  
 
 Introduction of new Design.

The Triumph Factory made up some knurled aluminum valve cover fasteners in the 
50s for their competition cars. Allows quick remove and replace of valve 
covers. We added an O ring seal feature for oil control in the design.

The first configuration is generic to most TR models, the second configuration 
is dedicated to the TR6 with engraving and lacquer fill.? Looks good, too.

Accepting orders with no charge for shipping to FOT. Shipping starts next week. 
Offer good for one week...until next Tuesday.
$15 each Fastener for generic TR.? (except GT6)
$20 each fastener for TR6

PayPal = n197tr4 at cs.com

Might be a good time to get the reusable silicone gasket that is superior in 
sealing.? Discounted to $15.....regardless of model.



Or available at Moss, very soon.

Thanks,

4505 Donald Dr
Cedar Falls, IA 50613

Gasketinnovations.com
Cell:? 319.464.4711_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Archive: http://www.team.net/archive


  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
<http://autox.team.net/pipermail/fot/attachments/20180327/6b356942/attachment.html>

<Prev in Thread] Current Thread [Next in Thread>