Had the same problem , we live in Calaveras County, CA there are many 50-60-s
hot rod folks here, took my valve cover to a good shop, told them the problem,
they cut a hole in the carb side of the cover, installed a nice vent from a
Chevy (all aluminum) â?¦ end of problem .
> On May 6, 2020, at 2:24 PM, andrew uprichard <auprichard@uprichard.net> wrote:
>
> Racetorations has a collecting system which I have on my fast-road TR3. No
> pipe to the manifold, but pipes run from the engine vent and the valve cover.
> You can see the collecting box on the inner fender, driverâ??s side.
>
> Disclaimer: my cousin owns Racetorations, but he is one of the English
> Uprichards and I am one of the Irish ones. He is a curmudgeon and I am a
> nice guy. No financial interest but if you mention my name and he is in a
> good mood, he may actually be nice to youâ?¦..
>
> Andrew Uprichard
> Jackson, Michigan
>
> From: Triumphs <triumphs-bounces@autox.team.net> On Behalf Of dave
> Sent: Wednesday, May 6, 2020 4:53 PM
> To: triumphs@autox.team.net
> Subject: [TR] valve cover venting
>
> My valve cover is spitting oil from the vent, probably because of the
> performance mods.
>
> Been thinking if I run a pipe between the valve cover and the intake
> manifold, that would create enough suction to solve the problem?
>
> Does anyone make this or do I have to build it?
> <20161031_153237.jpg>** triumphs@autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/anabil007@comcast.net
Life is too short
to drive Boring Cars
** triumphs@autox.team.net **
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/mharc@autox.team.net
|