triumphs
[Top] [All Lists]

Re: [TR] Front hub

To: andrew uprichard <auprichard@uprichard.net>
Subject: Re: [TR] Front hub
From: bill beecher <notakitcar@yahoo.com>
Date: Sat, 9 May 2020 11:00:11 -0500
Cc: Dave Ranteer <triumphs@autox.team.net>
Delivered-to: mharc@autox.team.net
Delivered-to: triumphs@autox.team.net
References: <014401d6260c$15431830$3fc94890$@uprichard.net>
Andrew,
Strange indeed, Iâ??m going drop it in and fire it up, itâ??s already back 
together. 

Wonâ??t take long, ran great when I pulled it out. 

Thanks for the offer, give me a couple weeks, I may be calling!

Bill

Stay Home, Wash Your Hands. 

On May 9, 2020, at 9:14 AM, andrew uprichard <auprichard@uprichard.net> wrote:

I just don't know how that can be possible. Wrong crank?  Repaired crank?

If the engine is out of the car, I'd seriously consider replacing the crank.  I 
have a spare here.

Andrew

-----Original Message-----
From: bill beecher <notakitcar@yahoo.com> 
Sent: Saturday, May 9, 2020 9:40 AM
To: andrew uprichard <auprichard@uprichard.net>
Cc: Dave Ranteer <triumphs@autox.team.net>
Subject: Re: [TR] Front hub

I guess I didnâ??t say it right.  When #1 is at TDC crank is at 7:30.  I know 
about moving the pulley, thatâ??s how I discovered this anomaly.  

A friend suggested that possibly the end of the crank has been broken and 
welded, seems unlikely.  

Bill

Stay Home, Wash Your Hands. 

On May 9, 2020, at 7:23 AM, andrew uprichard <auprichard@uprichard.net> wrote:

Bill:

The hub has been taken apart at some stage in the past and put together wrong.  
Separate the 2 halves and rotate 1/6 turn so when the keyway is at 6:00, the 
mark is at 12:00.

Andrew

-----Original Message-----
From: Triumphs <triumphs-bounces@autox.team.net> On Behalf Of bill beecher
Sent: Friday, May 8, 2020 6:04 PM
To: Dave Ranteer <triumphs@autox.team.net>
Subject: [TR] Front hub

OK, replacing the timing cover and then the front hub & pulley on the TR3 
motor.  The book says the when the keyway on the crank is at 6:00, the motor is 
at TDC. However it feels like TDC is a 1/6 of a turn beyond
that(clockwise) and that is where the notch in the hub is.  

Need to get the pulley positioned correctly before I move forward, it is a bear 
to deal with in situ. 

Someone who has BTDT?

Thanks,
Bill B
TS75131E


Stay Home, Wash Your Hands. 
** triumphs@autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive

Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/auprichard@uprichard.net




** triumphs@autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive

Unsubscribe/Manage: 
http://autox.team.net/mailman/options/triumphs/mharc@autox.team.net
<Prev in Thread] Current Thread [Next in Thread>