What were the break-in instructions? I used to warm them up, then use
the brakes to decelerate from about 60 to 30 four or five times in a
row quickly.
Also, don't forget to clean/grease/replace the pins and other hardware.
On Wed, Jul 8, 2020 at 5:51 PM dave <dave@ranteer.com> wrote:
>
> We put new brake pads in our 62 TR4, greased them up (just one side!), and
> did the break in instructions.
>
>
>
> They are squealing. Greased them again; they still squeal.
>
>
>
> I donâ??t have shims; perhaps that will solve it?
>
> ** triumphs@autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/fishplate@gmail.com
** triumphs@autox.team.net **
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/mharc@autox.team.net
|