I understood the Spitfireâ??s TW spec to be 0.006-0.014. At least for my 69.
Bud
Sent from my iPhone
> On Dec 4, 2020, at 3:10 PM, Dave Connitt <dconnitt@fuse.net> wrote:
>
> Hi Bob,
> Using two .005â?? oversized thrust washers in your situation will result in
> .001â?? clearance. Use one standard and one .005 and that would get you down
> to .006. I think that is closer to the maximum tolerance though. It will be
> interesting to see what others think l
> Dave Connitt
>
> Sent from my iPhone
>
>> On Dec 4, 2020, at 4:24 PM, Bob Nogueira <nogera@hotmail.com> wrote:
>>
>> Catologs show that thrust washers are available in Standard and .005
>> oversized.
>> Since the washers act in both directions, front to back back to front, does
>> a .005 set reduce total clearance .010?
>> With standard size I currently have a bit more than .011 play. Will using a
>> set of .005 washers, will the play be reduced to .006 or .001?
>> Thank you
>>
>>
>> Bob Nogueira
>> ** triumphs@autox.team.net **
>>
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
>>
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/triumphs/dconnitt@fuse.net
>
> ** triumphs@autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/levilevi@comcast.net
** triumphs@autox.team.net **
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/mharc@autox.team.net
|