triumphs
[Top] [All Lists]

Re: [TR] Interesting Dayton Wire Wheel Experience

To: bill beecher <notakitcar@yahoo.com>
Subject: Re: [TR] Interesting Dayton Wire Wheel Experience
From: Jim Henningsen <trguy75@gmail.com>
Date: Sat, 26 Jun 2021 21:44:37 -0400
Cc: TR List <triumphs@autox.team.net>
Delivered-to: mharc@autox.team.net
Delivered-to: triumphs@autox.team.net
References: <2ED85093-CB11-43EE-9F2B-CA62ED04EADA@yahoo.com>
Nice. I think the 205s were just too much fir a 4a. I was concerned the 165 
would be too narrow on a 6 inch rim and 185s are a lot mor expensive 

> On Jun 26, 2021, at 9:19 PM, bill beecher <notakitcar@yahoo.com> wrote:
> 
> I went to 6â?? mini lites on my last TR3 but stayed with the 165/15 
> Vredesteins, on the advise of Ted Schumacher.  Worked a treat, more rubber on 
> the ground, lighter weight, solid handling. 
> Bill
> 
> Sent from my TRS80
> 
> On Jun 26, 2021, at 6:26 PM, James Henningsen <trguy75@gmail.com> wrote:
> 
> I am now.  I bought 15 x 4.5 chrome wires from British Wire Wheel.  They 
> had a 20% off sale.   On the Daytonâ??s I had 205 65 15 as they have almost 
> identical diameter as 165 80 15.  Jim
> 
>> On Jun 26, 2021, at 5:37 PM, bill beecher <notakitcar@yahoo.com> wrote:
>> 
>> Interesting account, are you running 165/15 tyres?
>> 
>> Sent from my TRS80
>> 
>> On Jun 26, 2021, at 3:37 PM, Jim Henningsen <trguy75@gmail.com> wrote:
>> 
>> List:
>> I am refreshing my 72k orig mile 67 TR4A IRS.  Decided to put on a new set
>> of Dayton wire wheels for a Triumph TR250 or TR6. These are the BEST wire
>> wheels out there and still Made in America! 72 spoke, 15 x 6 inch TUBELESS
>> design. You do not need inner tubes. I bought these for my Triumph TR4A but
>> they did not look right (too wide) and actually caused a rubbing of the top
>> center front inner fender that cut a groove in the new tire.  Didn't effect
>> the wire wheel.  I was surprised as these say they fir the 250.  I decided
>> to dismount the tires since the the 4A has 4.5 inch rim width but I thought
>> these would be ok on a 4A. 
>> 
>> I installed new tires on them and put them on the 4A and drove 1 mile and
>> back into the garage. Took them off and had tires dismounted. They have no
>> scratches or curb rash and look like they did when they came out of the
>> original Dayton boxes. Still have the red stickers on the front of wheel
>> that are to be removed by tire dealer. Unfortunately, my tire install shop
>> threw the boxes away so I do not have them anymore. They will come in the
>> Rota alloy wheel boxes that I got when I bought new 15" alloys for my
>> Triumph TR8.
>> 
>> If you are looking for a great deal on a practically new perfect set of
>> Daton wire wheels, please contact me off list.  They are listed at the link
>> below.  Sorry to put this on the list but want to help out a fellow TR list
>> member who might like a deal and alert folks who might want to try similar
>> arrangements on their 4A.
>> 
>> https://ocala.craigslist.org/pts/d/ocala-dayton-wire-wheels-triumph-tr250/73
>> 42557271.html
>> 
>> Jim Henningsen
>> Ocala FL
>> 61 3A
>> 67 4A
>> 75 6
>> 81 8
>> 
>> 
>> ** triumphs@autox.team.net **
>> 
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive
>> 
>> Unsubscribe/Manage: 
>> http://autox.team.net/mailman/options/triumphs/notakitcar@yahoo.com
>> 
> 
** triumphs@autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive

Unsubscribe/Manage: 
http://autox.team.net/mailman/options/triumphs/mharc@autox.team.net
<Prev in Thread] Current Thread [Next in Thread>