Quoting DGreimel@aol.com:
> I have a Lucas distributor with a plate over the vacuum advance, a cap with
> five spigots off to the side that is retained with screws, and a hand
> engraved number 103FXR3. It has stamped numbers 4304 and 3685.
I can help a bit.... the '4304' is 43D4, the distributor type. It's the same as
the vacuum type 45D4 except for the blanking plate. The '3685' is the build
date, 36th week of 1985. The hand engraving may be from an aftermarket tuner,
maybe Piper or something.
Have a look at my web page, below, and follow the link to the TECH section and
the article on 'tuning the Lucas distributor'. It may help you figure out what
you've got.
--
Marcel Chichak chichm@telusplanet.net
Edmonton Alberta Canada, eh?
Peek into my world: www.telusplanet.net/~chichm
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/vintage-race
|