- 1. Bleeding Brakes And PDWA (score: 1)
- Author: Bill Moine <bmoine@yahoo.com>
- Date: Sun, 1 Jun 2003 16:30:52 -0700 (PDT)
- after replacing all the rubber in my brakes except the pdwa, when I was bleeding the brakes fluid started coming out the switch on the pdwa. I have not figured out if it is off center but either way,
- /html/6pack/2003-06/msg00022.html (6,912 bytes)
- 2. Re: Bleeding Brakes And PDWA (score: 1)
- Author: Acekraut11@aol.com
- Date: Sun, 01 Jun 2003 19:56:50 -0400
- Your PDWA should not leak from the switch no matter if it is centered or not. Your rubber O rings are the culprit. I think I purchased mine from Moss motors, but I am not sure. At least one, if not
- /html/6pack/2003-06/msg00023.html (7,021 bytes)
- 3. Re: Bleeding Brakes And PDWA (score: 1)
- Author: "Alan" <asalvato@tampabay.rr.com>
- Date: Sun, 1 Jun 2003 20:03:09 -0400
- I ran mine for several months with the pdwa off center and it never leaked; so i'd say U gots a problem. Al Salvatore 76tr6
- /html/6pack/2003-06/msg00024.html (7,446 bytes)
- 4. Re: Bleeding Brakes And PDWA (score: 1)
- Author: "Mark Anderton" <andertonm@cox.net>
- Date: Sun, 1 Jun 2003 20:54:51 -0400
- I had major problems attempting to rebuild my PDWA as described on my web page. When the brake lines were previously tightened into the unit, they flared on the ends to a diameter that was too large
- /html/6pack/2003-06/msg00026.html (8,027 bytes)
- 5. RE: Bleeding Brakes And PDWA (score: 1)
- Author: Hugh Fader <hfader@usa.net>
- Date: Sun, 01 Jun 2003 21:29:36 -0400
- Bill, you probably need to rebuild the PDWA. TRF has a kit. Whatever you do, don't overtighten the switch trying to stop the leak. It will cost you $30 for a new switch when you strip the threads on
- /html/6pack/2003-06/msg00027.html (7,376 bytes)
This search system is powered by
Namazu