- 1. Clutch Release From Floor (score: 1)
- Author: "triumph6970@netzero.com" <triumph6970@netzero.com>
- Date: Fri, 1 Jul 2005 10:22:21 GMT
- Clutch release comes off the floor. I've spring pinned the shaft in the bell housing in two locations along with the regular pin. It appears the peddle has some slop before in grabs. Do these tent to
- /html/6pack/2005-07/msg00004.html (7,022 bytes)
- 2. RE: Clutch Release From Floor (score: 1)
- Author: "Shawn J. Loseke" <sloseke@holly.colostate.edu>
- Date: Fri, 1 Jul 2005 07:19:32 -0600
- <triumph6970@netzero.com> == housing in two locations along with the regular pin. weak springs? You could also have wear in the pedal box itself. The pins in the pivot points in the pedal box tend t
- /html/6pack/2005-07/msg00007.html (7,650 bytes)
- 3. RE: Clutch Release From Floor (score: 1)
- Author: "Navarrette, Vance" <vance.navarrette@intel.com>
- Date: Fri, 1 Jul 2005 09:32:32 -0700
- You need to go through the whole clutch system. Worn cleavis pins, low clutch fluid, oversize holes in your pushrods, making sure the pushrod is connected to the clutch shaft using the correct hole,
- /html/6pack/2005-07/msg00008.html (7,876 bytes)
- 4. Re: Clutch Release From Floor (score: 1)
- Author: tr6taylor@webtv.net (Sally or Dick Taylor)
- Date: Fri, 1 Jul 2005 11:52:26 -0700
- tr6970--Get rid of the play in the pedal box, and the clutch release point will come up off the floor. The secondary arm where the clevis pin is atttached tends to wear to an oval shape. This can be
- /html/6pack/2005-07/msg00012.html (7,266 bytes)
- 5. Re: Clutch Release From Floor (score: 1)
- Author: Todd Bermudez <red_tr250@yahoo.com>
- Date: Fri, 1 Jul 2005 12:34:55 -0700 (PDT)
- one other thing aside from the pedal box. is it grabbing smoothly just off the floor or is it catching very abruptly...wonder if it could be sticky clutch? just curious todd bermudez cd198l cf25768u
- /html/6pack/2005-07/msg00014.html (8,084 bytes)
This search system is powered by
Namazu