- 1. [Bricklin] Hood Latch (score: 1)
- Author: "Greg Schroeder" <gschroeder@comcast.net>
- Date: Mon, 28 Sep 2009 12:02:14 -0500
- My hood latch wire came loose right after the drivers side released, but not the passengers side. Can I get to this to release the passengers side from under the car? Is there a way to possibly have
- /html/bricklin/2009-09/msg00033.html (7,015 bytes)
- 2. Re: [Bricklin] Hood Latch (score: 1)
- Author: "John T. Blair" <jblair1948@cox.net>
- Date: Mon, 28 Sep 2009 14:05:14 -0400
- Greg, That's a bummer!!! Yes you can get to the latch from under the car, but it a real PIA! We've done a couple of articles on the hood release cables over the years, one is how to get the hood open
- /html/bricklin/2009-09/msg00034.html (7,613 bytes)
- 3. Re: [Bricklin] Hood Latch (score: 1)
- Author: "Greg Schroeder" <gschroeder@comcast.net>
- Date: Mon, 28 Sep 2009 16:50:39 -0500
- I was finally able to reach the cable. I had thought the cable may have broken, but the plate that hold the wire housing was installed incorrectly and bent out and came off the housing. It was instal
- /html/bricklin/2009-09/msg00036.html (7,410 bytes)
- 4. Re: [Bricklin] Hood Latch (score: 1)
- Author: "Greg Schroeder" <gschroeder@comcast.net>
- Date: Mon, 28 Sep 2009 19:19:34 -0500
- I purchase a replacement cable a little thicker at 1/32 about 10 feet. I believe the original is 1/64. I removed the center cable and fed this one through. I added a little grease for the length of t
- /html/bricklin/2009-09/msg00037.html (7,585 bytes)
This search system is powered by
Namazu