- 1. TD brake bleeding (score: 1)
- Author: Steve Tritle <stritle@epix.net>
- Date: Sun, 18 Jun 2000 13:59:01 -0700
- Has anyone used the Mity-Vac Brake Bleeding tool kit? My 52 TD brake fluid is dirty and I have one of these contraptions. Do they really work or is there a bettewr way? Steve 52 TD
- /html/mg-t/2000-06/msg00137.html (6,651 bytes)
- 2. RE: TD brake bleeding (score: 1)
- Author: "Lew Palmer" <lpalmer@mn.mediaone.net>
- Date: Sun, 18 Jun 2000 15:31:35 -0500
- It's the best way I've ever used. Make sure of a couple of things, however: 1) That the master cylinder is full enough. By the time you have fresh clean fluid being sucked through the system, there i
- /html/mg-t/2000-06/msg00138.html (7,608 bytes)
- 3. RE: TD brake bleeding (score: 1)
- Author: "Hermance, Jonathan" <Jonathan_Hermance@ATK.COM>
- Date: Mon, 19 Jun 2000 15:01:34 -0500
- Trying unsuccessfully to bleed brakes on several occasions and an MGB clutch slave cylinder once with the Mighty-VAC has pretty well convinced me I just suck air past the rubber piston seal in the cy
- /html/mg-t/2000-06/msg00139.html (7,627 bytes)
- 4. Re: TD brake bleeding (score: 1)
- Author: "David Tinker" <david.tinker@virgin.net>
- Date: Wed, 21 Jun 2000 00:31:56 +0100
- Hi Jon, I fully believe in bleeding the brake system as it operates in use, with pressure from the mastercylinder side and not suction from the brake side. With suction the seals do not have their li
- /html/mg-t/2000-06/msg00140.html (8,586 bytes)
- 5. Re: TD brake bleeding (score: 1)
- Author: "Ray McCrary" <spook01@home.com>
- Date: Fri, 23 Jun 2000 17:45:14 -0500
- Hi guys, You can bleed them backwards by hooking to the bleed nipple, and forcing low pressure fluid back into the M/C. I usually do it this way with the silicone because of the propensity of the sil
- /html/mg-t/2000-06/msg00161.html (9,594 bytes)
This search system is powered by
Namazu