Search String: Display: Description: Sort:

Results:

References: [ +from:Ryoung@navcomtech.com: 471 ]

Total 471 documents matching your query.

241. RE: polishing compound (score: 1)
Author: "Randall Young" <ryoung@navcomtech.com>
Date: Thu, 31 Oct 2002 21:47:48 -0800
Scott, I believe it comes in different consistencies for different uses. The cream would be for hand application, while the hard stuff is for use on powered buffing wheels. With the wheel running, ho
/html/shop-talk/2002-10/msg00189.html (7,449 bytes)

242. RE: Electric Oven Power Requirements (score: 1)
Author: Randall Young <ryoung@NAVCOMTECH.COM>
Date: Tue, 3 Sep 2002 13:49:23 -0700
That part's easy, power in watts equals volts times amps (for resistive loads, which an oven is). So, 11.2kW @ 240V is 47 amps. The rest is a bit tougher, but being an older stove I'd guess around 1
/html/shop-talk/2002-09/msg00007.html (8,072 bytes)

243. RE: Which cordless drill? (was RE: Cordless drill clutches) (score: 1)
Author: "Randall Young" <ryoung@navcomtech.com>
Date: Wed, 18 Sep 2002 10:34:29 -0700
Ok, just so Larry won't be lonesome <g>, I have a 12v Ryobi that I'm quite happy with. I likely don't work it as heavy as the rest of you guys, but it has all the power I need (drives 2" decking scre
/html/shop-talk/2002-09/msg00101.html (10,056 bytes)

244. RE: Impact Wrenches (score: 1)
Author: "Randall Young" <ryoung@navcomtech.com>
Date: Thu, 26 Sep 2002 00:30:01 -0700
Inch, I have what may be a similar gun (although I got it from JCW many years ago). It also was priced almost as cheap as the cheapest unit they had, and boasted 450 ft lb of torque. Do I think it r
/html/shop-talk/2002-09/msg00144.html (9,235 bytes)

245. RE: Impact wrench, UPDATE (score: 1)
Author: "Randall Young" <ryoung@navcomtech.com>
Date: Sat, 28 Sep 2002 13:00:08 -0700
Friend of mine who had a local tire shop always used 1/2" lines, and 150 psi line pressure, with all his air tools. Randall /// unsubscribe/change address requests to majordomo@autox.team.net or try
/html/shop-talk/2002-09/msg00166.html (8,052 bytes)

246. RE: [mill_drill] Making 12 ba nuts (score: 1)
Author: Randall Young <ryoung@NAVCOMTECH.COM>
Date: Mon, 5 Aug 2002 15:06:32 -0700
Not to belabor the point, but have you ever tried buying 12 BA brass nuts, let alone in a 2mm square format ? To answer the original question, I would be try to make a "nut tap" in 12BA. Turn a leng
/html/shop-talk/2002-08/msg00047.html (7,348 bytes)

247. RE: Shop Rags (score: 1)
Author: Randall Young <ryoung@NAVCOMTECH.COM>
Date: Mon, 5 Aug 2002 17:05:45 -0700
FWIW, I've been trying to find a concoction that will clean the rags without leaving deposits on the inside of the washing machine (I do launder my rags in the home machine, clean it as necessary, t
/html/shop-talk/2002-08/msg00050.html (8,465 bytes)

248. RE: old style propane tanks (score: 1)
Author: "Randall Young" <ryoung@navcomtech.com>
Date: Wed, 7 Aug 2002 04:45:33 -0700
I haven't actually done it yet, but my understanding is that only the valve has changed, and it can be replaced for roughly half the price of a new tank. Probably not by Wally Mart, tho. Randall ///
/html/shop-talk/2002-08/msg00062.html (7,310 bytes)

249. RE: welder & glasses (score: 1)
Author: "Randall Young" <ryoung@navcomtech.com>
Date: Wed, 7 Aug 2002 05:03:55 -0700
John, I don't wear bifocals just yet, but I do have the problem. Ask your eye doctor what the "close" prescription is for your glasses (mine was willing to give me the information over the phone but
/html/shop-talk/2002-08/msg00063.html (9,003 bytes)

250. RE: Exhaust Pipe Paint (score: 1)
Author: Randall Young <ryoung@NAVCOMTECH.COM>
Date: Wed, 7 Aug 2002 15:13:30 -0700
Bob, the secret to the high temp paints (at least the ones I've used) is that they have to be heated to cure the paint, somewhat similar to powder coat. I used "BBQ" paint on the mild steel exhaust
/html/shop-talk/2002-08/msg00072.html (7,383 bytes)

251. RE: Speaking of exhausts... (score: 1)
Author: "Randall Young" <ryoung@navcomtech.com>
Date: Fri, 9 Aug 2002 22:12:17 -0700
If the shop were somehow sealed so well that the engine could significantly reduce the air pressure inside, the walls would implode ! For example, 1 psi (roughly the pressure drop from climbing 2000
/html/shop-talk/2002-08/msg00090.html (8,766 bytes)

252. RE: Speaking of exhausts... (score: 1)
Author: "Randall Young" <ryoung@navcomtech.com>
Date: Sat, 10 Aug 2002 05:59:03 -0700
We are all going to end up dead, whether we do this in our garage or not. Randall /// unsubscribe/change address requests to majordomo@autox.team.net or try /// http://www.team.net/mailman/listinfo
/html/shop-talk/2002-08/msg00093.html (8,024 bytes)

253. RE: Speaking of exhausts...and CO poisoning (score: 1)
Author: "Randall Young" <ryoung@navcomtech.com>
Date: Sat, 10 Aug 2002 08:28:07 -0700
But there's an important point which is perhaps being overlooked, the engine indiscriminately consumes air (assuming the exhaust is going outdoors), it does not selectively consume O2. Unless you ar
/html/shop-talk/2002-08/msg00097.html (7,860 bytes)

254. RE: Another washer question (score: 1)
Author: Randall Young <ryoung@NAVCOMTECH.COM>
Date: Fri, 16 Aug 2002 13:59:01 -0700
And, if you need only 2-3 ft extra, I'd probably look into how high the washer is capable of pumping the water. Randall /// unsubscribe/change address requests to majordomo@autox.team.net or try ///
/html/shop-talk/2002-08/msg00141.html (7,666 bytes)

255. RE: Multiple 220v outlets (score: 1)
Author: "Randall Young" <ryoung@navcomtech.com>
Date: Sun, 18 Aug 2002 10:43:26 -0700
There's no reason you can't daisy-chain 220v outlets just like 110v outlets. The reason it isn't commonly done is that most 220v outlets are not general purpose outlets, they're for a specific devic
/html/shop-talk/2002-08/msg00151.html (8,621 bytes)

256. RE: removing old powder coat (score: 1)
Author: Randall Young <ryoung@NAVCOMTECH.COM>
Date: Mon, 19 Aug 2002 17:04:07 -0700
Yes, but I don't think you want to mess with it. Few years ago there was a big fire near here, lots of extremely noxious orange smoke. Turns out it was at a plant that powdercoated wheels, someone l
/html/shop-talk/2002-08/msg00159.html (7,620 bytes)

257. RE: Multiple 220v outlets (score: 1)
Author: "Randall Young" <ryoung@navcomtech.com>
Date: Tue, 20 Aug 2002 05:28:41 -0700
Good question. Do you have an example of one that does ? Randall /// unsubscribe/change address requests to majordomo@autox.team.net or try /// http://www.team.net/mailman/listinfo /// Archives at h
/html/shop-talk/2002-08/msg00166.html (8,227 bytes)

258. RE: Multiple 220v outlets (score: 1)
Author: "Randall Young" <ryoung@navcomtech.com>
Date: Wed, 21 Aug 2002 03:50:11 -0700
Not only does it not say outlets can't be daisy-chained, duplex outlets actually have a separate "pass-through" current rating, for how much current can flow through the tabs. Many have a 20 amp pas
/html/shop-talk/2002-08/msg00193.html (8,608 bytes)

259. RE: Another 220v question (score: 1)
Author: Randall Young <ryoung@NAVCOMTECH.COM>
Date: Wed, 21 Aug 2002 09:25:40 -0700
This is acceptable if the green wire only grounds the chassis of the welder, and is not used to power anything (like a fan or lamp). Assuming your dryer has a 110v light and/or motor, this is an obs
/html/shop-talk/2002-08/msg00198.html (10,224 bytes)

260. RE: Another 220v question (score: 1)
Author: Randall Young <ryoung@NAVCOMTECH.COM>
Date: Thu, 22 Aug 2002 10:15:42 -0700
If the neutral side opens up for some reason (broken wire, plug falling out of socket, etc.), the load side of the broken neutral will go to the same voltage as the hot wire. If the same wire is the
/html/shop-talk/2002-08/msg00203.html (8,351 bytes)

Current List: 241 - 260
Page: [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] [15] [16] [17] [18] [19] [20]
This search system is powered by Namazu