You can change the initial distributor timing by repositioning the intermediate shaft in relation to the jackshaft gear. The intermediate shaft is the piece that the drive tip of the distributor enga
A new book is on the market and it is highly recommended and is the most complete resource available in print. The Datsun Roadster Book, LLC 5380 Overbend Trail Suwanee, GA 30024 Website http://www.t
I don't know who the seller is. But he clearly stated that the items were packed and ready to ship in his auctions. The seller also clearly stated the cost of shipping instead of waiting until the au
You could buy one at Barnes and Noble for only $5 Stan == ________________________________________ Datsun-roadsters mailing list http://www.team.net/archive http://autox.team.net/mailman/listinfo/dat
It isn't necessary to open the engine or turn it over. Remove the distributor and then remove the drive dog pin at the lower end of the dizzy shaft by moving the springlike retainer wire from above t
Get a straight used one. They should be plentiful and they don't wear out. If you want to make one maybe something like 4130 would do. Don't forget that there is a left hand thread on one end. Stan =
FYI the zipper window isn't very easy to replace for the tops made locally in SoCal. The ones generally available are sewn in across the bottom and the zipper is only on the sides and top of the win
There is/was a date code stamped on the back of the tach and speedo that indicates when they were made. Early half year tach and speedo had a shiny center hub and later ones had a flat black center h
The U20 rods and Chevy L88 rods for the hipo 427BB look like two peas in a pod. They are strikingly similar but not dimensionally the same. When I saw them side by side many years back it shocked me.
Not receiving messages starting yesterday. Missed a bunch. ________________________________________ Support Team.Net http://www.team.net/donate.html Datsun-roadsters mailing list http://www.team.net/
The hex recess retaining bolt has a left hand thread. You need to turn it clockwise to loosen. The bearing presses on the shaft. Stan == ________________________________________ Support Team.Net htt
WE DON'T NEED ANNUAL INSPECTIONS ON ANY OF OUR CARS. PLEASE CONTACT YOUR LEGISLATORS and the GOVERNATOR. Stan == In an effort to avoid public scrutiny, California Assemblyman Dave Jones (<mailto:Asse
Sorry for the bandwidth but just checking to see if my messages go through. S ________________________________________ Support Team.Net http://www.team.net/donate.html Datsun-roadsters mailing list h
The time has come to eliminate much of my collection of roadster parts and items. Circumstances beyond my control have caused this reduction. I have a list of selected items to sell off from my colle
I apologize if you receive this a second time. I made previous attempts and it did not seem to go to the list distribution. Wife says to get rid of stuff. This is a downsize project from more than 25