Author: "Eric and Linda St.Phillips" <lstphil1@rochester.rr.com>
Date: Sun, 12 Sep 1999 14:35:40 -0400
Charlie K, Rob J, List members, Dam , I never intended to be the spark that set off the powder keg. I really appreciate all the people and diverse information that this list provides. I know I'm not
Author: "Eric and Linda St.Phillips" <lstphil1@rochester.rr.com>
Date: Mon, 13 Sep 1999 21:44:40 -0400
I had the color mixed from what was on the inside of the glovebox lid on my 59. After polishing it up a bit, medium gray is what I would call it . Eric St.Phillips 1959 GMC 100 Fairport, NY --Origina
Wasn't someone on the list looking for one of these panel taillights? Title of item: NOS 1955-59 chevy-gmc panel truck tail light Seller: rustbuckets@earthlink.net Starts: 08/09/99, 20:02:25 PDT Ends
Author: "Eric and Linda St.Phillips" <lstphil1@rochester.rr.com>
Date: Fri, 27 Aug 1999 20:11:12 -0400
Hi All, I,m doing (2) staged 2 barrel Holley-Webers on my 59 GMC with 270 Cu In. six. Using a Nicson 2x1 intake with (2) 1 to 2 barrel converters bolted on . (Tom Langdon sells these..Stovebolt Engin
Author: "Eric and Linda St.Phillips" <lstphil1@rochester.rr.com>
Date: Fri, 27 Aug 1999 20:38:52 -0400
I use play sand or "Black Beauty" purchased from the local Auto Parts Store. I think its made from (is) a by product of some industrial process and as its named, it is jet black . Cuts fast and recy
Author: "Eric and Linda St.Phillips" <lstphil1@rochester.rr.com>
Date: Thu, 1 Jul 1999 22:16:08 -0400
Dumb Question ....as I too will soon be installing the gas tank back into my truck.... If the rubber grommet is a seal between the filler tube and cab why is it necessary to apply a sealant like RTV
Author: "Eric and Linda St.Phillips" <lstphil1@rochester.rr.com>
Date: Thu, 1 Jul 1999 22:27:37 -0400
Where does one go to get a manifold JetHot coated? Thanks. Eric A. St.Phillips 1959 GMC 100 Fairport, NY --Original Message-- From: jack halton <safesix@worldnet.att.net> To: David <David@gardener.c
Author: "Eric and Linda St.Phillips" <lstphil1@rochester.rr.com>
Date: Thu, 17 Jun 1999 18:27:16 -0400
Hi All, Having problems fitting the generator mounted power steering pump under the split Nicson exhaust headers on my 59 GMC with 270 Straight Six. I've heard that a split exhaust can be made using
Author: "Eric and Linda St.Phillips" <lstphil1@rochester.rr.com>
Date: Thu, 20 May 1999 17:41:36 -0400
I had this problem with my 59 GMC . The body shop tech cut an access hole through the door skin, fixed the hinge mount , then welded up the hole. Sounds brutal but you can't tell now its in primer an
Author: "Eric and Linda St.Phillips" <lstphil1@rochester.rr.com>
Date: Fri, 21 May 1999 18:27:59 -0400
Eastwood has a zinc filled paint for fuel tanks which mimicks the original bare (plated) metal. This will prevent rust and looks nice compared with conventional primer. Eric St.Phillips Fairport, NY
Author: "Eric and Linda St.Phillips" <lstphil1@rochester.rr.com>
Date: Mon, 24 May 1999 18:31:21 -0400
I sure hope that sawmill wood was at least air dried as you will lose 3/4 of an inch or so cross grain over the width of the bed as it dries. Eric St.Phillips Fairport, NY 1959 GMC 100 --Original Me
Author: "Eric and Linda St.Phillips" <lstphil1@rochester.rr.com>
Date: Fri, 28 May 1999 16:59:42 -0400
Remember, this guy is in NY....its a snow sled! --Original Message-- From: Doug Pewterbaugh <dpewter@email.msn.com> To: ace0027@ibm.net <ace0027@ibm.net>; oletrucks <oletrucks@autox.team.net> Date: F
Author: "Eric and Linda St.Phillips" <lstphil1@rochester.rr.com>
Date: Fri, 28 May 1999 19:40:25 -0400
Yup, I'm sure (if we're both talking about that purple winged deal). My kids have one which I've been tripping over in the garage and finally put away for the year. They're made by rubbermaid, fancy
I saw this item for sale at eBay and thought that someone on the list might be Title of item: NOS rear fenders Chevy/GMC 39-46 panel/suburb Seller: rojack@azstarnet.com Starts: 03/01/99 10:01:37 PST
Author: "Eric and Linda St.Phillips" <lstphil1@rochester.rr.com>
Date: Thu, 4 Mar 1999 18:07:21 -0500
Hi All, While disassembling my GMC 270 six I removed the fan and while handling it noticed a crack at the base of the blade running from center across 2/3 the width of the blade. Thank God it didn't
Author: "Eric and Linda St.Phillips" <lstphil1@rochester.rr.com>
Date: Thu, 4 Mar 1999 18:10:49 -0500
Would the Task Force Trucks have come with this same equipment? Thanks. Eric St.Phillips 1959 GMC 100, long fleetside Fairport, NY --Original Message-- From: tcape <tcape@weblnk.net> To: Brad Newman
Author: "Eric and Linda St.Phillips" <lstphil1@rochester.rr.com>
Date: Sat, 6 Mar 1999 13:46:23 -0500
I think you are refering to the torpedo like extensions to the bumper not a guard that extends up in front of the grill? If so these were stock on 1958 trucks and were removed for the 59 model . Eri
Author: "Eric and Linda St.Phillips" <lstphil1@rochester.rr.com>
Date: Sun, 7 Mar 1999 09:13:27 -0500
Charlie and All, When I was looking for fender patches for the lower rear area behind the wheel opening for my 59, I was told that the 58-59 fender is different in that area as well as the "dual head
Author: "Eric and Linda St.Phillips" <lstphil1@rochester.rr.com>
Date: Sun, 7 Mar 1999 09:40:49 -0500
Christian and All, I had a parking lamp bezel conversation with a knowledgable tech rep at Brothers in CA. He told me that the cost for tooling for reproductions costs about $200,000. Therefore the r
I saw this item for sale at eBay and thought that the list might be interested. Title of item: Vintage GMC Pick-up truck advertising figure Seller: tcarroll@netsync.net Starts: 03/06/99 22:03:18 PST