- 1. [FOT] TR250/TR4 weight (score: 1)
- Author: greg <gtlund@cyberspeedway.net>
- Date: Tue, 07 Nov 2006 16:43:19 -0700
- A few years ago I weighed my TR250 when it was in pieces (still is) and thought some of you might be interested. This was done on a set of Longacre scales recently calibrated. I also weighed a TR4 he
- /html/fot/2006-11/msg00048.html (6,909 bytes)
- 2. Re: [FOT] TR250/TR4 weight (score: 1)
- Author: "Joe Boruch" <jaboruch@netzero.net>
- Date: Wed, 8 Nov 2006 01:42:41 GMT
- That 1820 weight is with driver. My TR3A is at about 2120 with me and 2 gallons of fuel. I have fiberglass fenders, boot and bonnet lids and front apron. Still trying to figure out where to loose 300
- /html/fot/2006-11/msg00049.html (7,461 bytes)
- 3. Re: [FOT] TR250/TR4 weight (score: 1)
- Author: "SHANE Ingate" <hottr6@hotmail.com>
- Date: Wed, 08 Nov 2006 16:05:57 -0500
- Weighed Rags (TR6) on calibrated grain scales (apparently much more accurate than electronic) and came up with the following: LF: 479 lbs RF: 494 LR: 430 lbs RR: 435 Total = 1837 lbs (with no interio
- /html/fot/2006-11/msg00061.html (7,429 bytes)
- 4. RE: [FOT] TR250/TR4 weight (score: 1)
- Author: "Mike Munson" <fasttrs@mindspring.com>
- Date: Thu, 9 Nov 2006 18:33:36 -0500
- My TR6 at the last race (Production Festival at VIR) weighed 2213 with me in the car 205#. It has a fiberglass bonnet and 4 fenders. I finished with7.5 gal of gas which should weigh 45#. If I put on
- /html/fot/2006-11/msg00065.html (8,146 bytes)
This search system is powered by
Namazu