- 1. Re: [FOT] front spindles and spacers (score: 1)
- Author: WEmery7451@aol.com
- Date: Wed, 8 Mar 2006 13:12:32 EST
- << If you are interested in this project, or if you know of someone who is not on the list who might be interested, and if you think there is a better-than-50-50 chance that you would buy a kit if av
- /html/fot/2006-03/msg00069.html (7,745 bytes)
- 2. [FOT] front spindles and spacers (score: 1)
- Author: "Jack W. Drews" <vinttr4@geneseo.net>
- Date: Wed, 08 Mar 2006 11:59:27 -0600
- This message is part project report and part market survey for a kit that most of you are familiar with. A couple of years ago I determined why our TR brakes were unpredictable when racing - sometime
- /html/fot/2006-03/msg00071.html (9,809 bytes)
- 3. RE: [FOT] front spindles and spacers (score: 1)
- Author: "Henry Frye" <henry@henryfrye.com>
- Date: Wed, 8 Mar 2006 16:33:28 -0500
- I like my kit, it does what you say it does, and if I ever built another race TR I most certainly would want another kit. However, until I have the need, I am not in the hunt for a replacement. But,
- /html/fot/2006-03/msg00073.html (8,398 bytes)
- 4. Re: [FOT] front spindles and spacers (score: 1)
- Author: N197TR4@cs.com
- Date: Wed, 8 Mar 2006 17:55:58 EST
- Go for it Jack! One of the reasons that this can be done now, is the advancing ability to communicate. Viva la Bradakis. You might be surprised to find a number of "street people" that will be intere
- /html/fot/2006-03/msg00074.html (10,630 bytes)
- 5. Re: [FOT] front spindles and spacers (score: 1)
- Author: "Charly Mitchel" <charly@mitchelplumbing.com>
- Date: Wed, 8 Mar 2006 10:36:29 -0800
- Jack, I have the strengthened axel kits on my car already and have just received the Southwick hubs for my car. I've been told I need to get different spacers for the new hubs because the distance be
- /html/fot/2006-03/msg00076.html (7,771 bytes)
- 6. RE: [FOT] front spindles and spacers (score: 1)
- Author: "Don Carter" <don@carterdesignassociates.com>
- Date: Wed, 8 Mar 2006 18:25:07 -0600
- I would also like to be put on the list and could use a kit ASAP. Thanks Don W. Carter, AIA Carter Design Associates 6213 Skyline Dr., Suite 100 Houston, Texas 77057 (713) 529-2288 Telephone (713) 78
- /html/fot/2006-03/msg00079.html (7,544 bytes)
- 7. RE: [FOT] front spindles and spacers (score: 1)
- Author: "Kramer, Robert" <RKramer@rdoequipment.com>
- Date: Wed, 8 Mar 2006 16:04:14 -0600
- I thought I might mention this to you since it is another market for these parts. I have run extra wide tires on 7" rims on my street TR6 for years. I autocross it once a year at a VTR regional and I
- /html/fot/2006-03/msg00080.html (7,757 bytes)
- 8. RE: [FOT] front spindles and spacers (score: 1)
- Author: "Ken Gano, home" <triumphs@consolidated.net>
- Date: Wed, 8 Mar 2006 22:01:53 -0600
- Hear Ya, Hear Ya, Although, it is very unlikely my TR3 will ever see a track, it is only because of the availability of racing parts that I am able to enjoy it to the extent I do (+40K miles in 3 sea
- /html/fot/2006-03/msg00086.html (7,527 bytes)
- 9. RE: [FOT] front spindles and spacers (score: 1)
- Author: Bill Babcock <BillB@bnj.com>
- Date: Wed, 8 Mar 2006 21:09:54 -0800
- I'll need at least one set, probably two. == unsubscribe/change address requests to majordomo@autox.team.net
- /html/fot/2006-03/msg00087.html (7,228 bytes)
This search system is powered by
Namazu