- 1. [Fot] "Smokey's way" (score: 1)
- Author: "Doug Mitchell" <dmitchel@sbcglobal.net>
- Date: Sun, 25 Oct 2009 17:33:19 -0400
- You can, indeed, but you'll probably have problems with your starter. I have enough problems starting my car without doing it against full advance. You can add a switch to cut off the ignition until
- /html/fot/2009-10/msg00245.html (7,001 bytes)
- 2. Re: [Fot] "Smokey's way" (score: 1)
- Author: n197tr4@cs.com
- Date: Sun, 25 Oct 2009 19:43:43 -0400
- While disassembling the 5th rocker shaft I have ever disassembled in my life this evening I had one of these moments where I question why things are the way they are. This time it is all centered on
- /html/fot/2009-10/msg00246.html (9,573 bytes)
- 3. Re: [Fot] "Smokey's way" (score: 1)
- Author: "Greg & Alison Blake" <ablake2@austin.rr.com>
- Date: Tue, 27 Oct 2009 00:06:08 -0600
- Hi Fot'rs I am still working on the GT6 motor and was wondering what compression ratios people are running in their 6 banger engines, and what bearings are being used. I am hearing that there are no
- /html/fot/2009-10/msg00250.html (8,062 bytes)
- 4. [Fot] "Smokey's way" (score: 1)
- Author: Group44TR7@aol.com
- Date: Tue, 27 Oct 2009 09:59:48 EDT
- I guess I am not the only one that thinks about such things. I talked with Garry?? at Rocker Arm Specialist in CA today. He said that most of the shafts they work with have the oil feed holes at 6 O'
- /html/fot/2009-10/msg00256.html (6,781 bytes)
- 5. Re: [Fot] "Smokey's way" (score: 1)
- Author: Scott Janzen <s.janzen@comcast.net>
- Date: Wed, 28 Oct 2009 11:23:29 -0400
- I certainly would not to give up looking at the advance curve and say it was all over at 3500 rpm. There is more to it than that. -- Original Message -- From: "Stutzman" <stutzmans@comcast.net> To: "
- /html/fot/2009-10/msg00263.html (7,578 bytes)
- 6. Re: [Fot] "Smokey's way" (score: 1)
- Author: "Joe Boruch" <jaboruch@netzero.net>
- Date: Wed, 28 Oct 2009 17:13:35 GMT
- AMICI - there is a guy in South Dakota selling The TR4 ARP Head Stud kits on Ebay for $98. item # 380164719252 nfi Dennis _______________________________________________ Support Team.Net http://www.t
- /html/fot/2009-10/msg00264.html (10,992 bytes)
- 7. Re: [Fot] "Smokey's way" (score: 1)
- Author: "Stutzman" <stutzmans@comcast.net>
- Date: Wed, 28 Oct 2009 19:54:11 -0400
- My TR6 runs a recurved 22D Lucas dist. and I've have had great luck with it. I should mention that I own an Allen Distributor machine which makes the rebuilds and recurves pretty straightforward. Too
- /html/fot/2009-10/msg00266.html (9,065 bytes)
- 8. Re: [Fot] "Smokey's way" (score: 1)
- Author: "Kas Kastner" <kaskas@cox.net>
- Date: Wed, 28 Oct 2009 17:12:45 -0700
- Joe made a slight error in the address he used when sending this out. mjb. FOT, Remember BARRY MUNSON'S introduction? He's the guy from Canada that races a P1800 and is preparing a TR3A. He is so app
- /html/fot/2009-10/msg00267.html (10,192 bytes)
This search system is powered by
Namazu