- 1. [Fot] Annular clutch slave cylinder (score: 1)
- Author: "Rocky Entriken" <rocky@spitfire4.com>
- Date: Mon, 22 Feb 2010 17:44:55 -0600
- Personally I'd prefer a perennial, not one that has to be replanted every season. Oh. Never mind. mjb. _______________________________________________ Support Team.Net http://www.team.net/donate.html
- /html/fot/2010-02/msg00214.html (10,237 bytes)
- 2. Re: [Fot] Annular clutch slave cylinder (score: 1)
- Author: George Harmuth <harmug@us.ibm.com>
- Date: Mon, 22 Feb 2010 19:34:49 -0500
- I bought one from Herman Van Den Akker. He has a special mount for the McLoad bearing he supplied. You can see pictures at: http://picasaweb.google.com/Triosan/AnnularThrowOutBearingForTRs# His websi
- /html/fot/2010-02/msg00215.html (7,418 bytes)
- 3. Re: [Fot] Annular clutch slave cylinder (score: 1)
- Author: "David W. Riddle" <dave@microworks.net>
- Date: Mon, 22 Feb 2010 18:23:57 -0700
- I've been running one with a 20 psi switch. The switch is available from NAPA or Pegasus. I'm running a simple light I picked up at a local parts store, but I'd like to switch it out for an LED ligh
- /html/fot/2010-02/msg00216.html (7,159 bytes)
- 4. Re: [Fot] Annular clutch slave cylinder (score: 1)
- Author: "Norlin Engineering" <norlinengineering@comcast.net>
- Date: Mon, 22 Feb 2010 18:58:06 -0800
- I am using the one from Howe racing, with a Tilton clutch. Since I am using a T5 tranny with my own bell housing the hydraulic throw-out bearing mounts on studs on where the original TR tranny nose b
- /html/fot/2010-02/msg00220.html (8,991 bytes)
- 5. Re: [Fot] Annular clutch slave cylinder (score: 1)
- Author: "Mark Pendergrass" <mpendy@dishmail.net>
- Date: Mon, 22 Feb 2010 19:21:56 -0800
- Some of the switches are adj. from 5lb to 50lb, as far as the temp warning goes i stick with the mech. gauge only, an electrician i am, but i just am not keen on electric gauges.............MP -- Ori
- /html/fot/2010-02/msg00221.html (10,583 bytes)
This search system is powered by
Namazu