- 1. [Fot] Need a brake pedal switch (score: 1)
- Author: Larry Young <cartravel@pobox.com>
- Date: Fri, 27 Aug 2010 16:13:50 -0500
- Hey Rocky... Try taking the old one to NAPA, etc....and seeing if they can match up the old one to a new one by length and diameter...as long as it's 12volt and close to the proper size, it will work
- /html/fot/2010-08/msg00354.html (8,634 bytes)
- 2. Re: [Fot] Need a brake pedal switch (score: 1)
- Author: "WILLIAM TOBIN" <william.tobin3@verizon.net>
- Date: Fri, 27 Aug 2010 19:27:10 -0400
- I believe there is a Ford switch from a Falcon that works, that's what I used in my TR-3 street car when I converted it from that leaky, unreliable hydraulic switch. Check NAPA or whatever you have i
- /html/fot/2010-08/msg00355.html (8,762 bytes)
- 3. Re: [Fot] Need a brake pedal switch (score: 1)
- Author: "WILLIAM TOBIN" <william.tobin3@verizon.net>
- Date: Fri, 27 Aug 2010 20:24:47 -0400
- Joe: No, it is a fresh engine we put together a couple of weeks ago. The head is worked, cast pistons on Pauter rods, and an 1147cc crank with a Spedi-Sleeve over the scroll. Everything else is as we
- /html/fot/2010-08/msg00356.html (10,097 bytes)
- 4. Re: [Fot] Need a brake pedal switch (score: 1)
- Author: "Terry Stetler" <tlizzard@msn.com>
- Date: Fri, 27 Aug 2010 21:25:12 -0400
- if anyone has a TR4,5 or 6 steering rack sitting on the shelf, can you please measure the total length. either end of thread to end or thread (on rack end) or centre to centre of tie rod ends thanks.
- /html/fot/2010-08/msg00359.html (6,900 bytes)
- 5. Re: [Fot] Need a brake pedal switch (score: 1)
- Author: davehogye <dlhogye@comcast.net>
- Date: Sat, 28 Aug 2010 23:02:41 +0000 (UTC)
- For those of you running the small-crank Spitfire motors, what do you use as a lower (crank) timing gear when using a two-row timing chain? Scott B. _______________________________________________ fo
- /html/fot/2010-08/msg00375.html (9,633 bytes)
This search system is powered by
Namazu