- 1. [Fot] Recomendations for rev limiters (score: 1)
- Author: n197tr4@cs.com
- Date: Sun, 11 Jul 2010 13:57:31 -0400
- I like the MSD that has a soft Rev Limiter. If your sanctioning body allows the MSD ignition system, it might be your best bet. Joe C. I am running a Mallory points dist. and need recommendations on
- /html/fot/2010-07/msg00090.html (6,843 bytes)
- 2. Re: [Fot] Recomendations for rev limiters (score: 1)
- Author: "Richard Good" <goodparts@verizon.net>
- Date: Mon, 12 Jul 2010 07:29:26 -0400
- I currently use the MSD Soft-touch Rev Limiter with my Mallory, works fine. My $.02, Bob T. I am running a Mallory points dist. and need recommendations on a rev limiter. I am looking at the Petroni
- /html/fot/2010-07/msg00091.html (8,074 bytes)
- 3. Re: [Fot] Recomendations for rev limiters (score: 1)
- Author: Bill Babcock <billb@bnj.com>
- Date: Mon, 12 Jul 2010 12:35:55 -0700
- I run an Omex rev limiter which can be switched to hard or soft cut. I use hard cut. Cheers Chris --Urspr|ngliche Nachricht-- Von: fot-bounces@autox.team.net [mailto:fot-bounces@autox.team.net] Im Au
- /html/fot/2010-07/msg00092.html (8,239 bytes)
- 4. Re: [Fot] Recomendations for rev limiters (score: 1)
- Author: "Greg & Alison Blake" <ablake2@austin.rr.com>
- Date: Mon, 12 Jul 2010 18:01:48 -0500
- I have been having head gasket issues for awhile now and finally went with a solid copper gasket from Gasket works that actually was designed to lower compression a bit. It leaked oil at ECR, so the
- /html/fot/2010-07/msg00093.html (7,156 bytes)
- 5. Re: [Fot] Recomendations for rev limiters (score: 1)
- Author: "MadMarx" <tr4racing@googlemail.com>
- Date: Tue, 13 Jul 2010 09:05:02 +0200
- I've had trouble getting my copper head gaskets to seal on my Spitfire motors unless the head and block surfaces are very, very smooth (and clean). Once the surfaces were smooth, I had reasonable luc
- /html/fot/2010-07/msg00096.html (7,788 bytes)
This search system is powered by
Namazu