Have you checked for exhaust gas in the radiator? If it's getting exhaust gas, then you know it's a leakage problem and can concentrate on that area. If not, then you know to look elsewhere, like th
What's happening with the temperature guage during the 4-6 laps leading up to this? Do you run a thermostat? Has the system been bled of all large air bubbles? Have you checked to see that water is f
Hi randall.....a couple of things that happened on my 1296 spitfire race car.....I was losing water from the FREEZE PLUG BEHIND THE WATER PUMP HOUSING(not a visible plug).....this would overheat the
Author: "Diesel Performance Parts Inc. - Info" <info@dieselperformanceparts.com>
Date: Thu, 23 Apr 2009 07:34:19 -0500
The first thing I always think of is a hose on the suction side _______________________________________________ Support Team.Net http://www.team.net/donate.html http://www.fot-racing.com Fot mailing
use HD hoses or ones with steel coil...use a good race rad cap...20ish lbs ** Access 350+ FREE radio stations anytime from anywhere on the web. Get the Radio Toolbar! (http://toolbar.aol.com/aolradio
I would think the radiator cap rating would have to depend on the radiator that Craig is running. If it is a Triumph radiator I don't think the radiator would last long using a cap rated for 20 lbs.
Does the temp go up pretty quick before this happens.?....yu may have a air pocket in the rear head ..very common unless you can fill from higher point or rad is higher than head...yu can use the plu
something else to ck:..crank pulley shud be smaller than waterpump pulley or cavitation and too fast a speed will not allow cooling and wear-out pump..I use a 1500 pump with lge pulley and a smaller
If the engine isn't overheating until the loss of coolant is excessive, have done all the checks to rule out leaking exhaust gases pressurizing the system, etc., I would take a long, hard look at the
wondering if anyone has had any experience with these tires? Available in the increasingly rare size of 205/60-13 for my GT6 _______________________________________________ Support Team.Net http://ww
What he meant by "Selling for a friend" is that if he sells it for that price the guy will be his friend for life! JVV -- Original Message -- From: "Joe Boruch" <jaboruch@netzero.net> To: <fot@autox.
Hi Gang, any body have a good source for Dolomite Sprint Valve spacers/pucks? TR7 ones aren't the same.....................Cheers Henry Morrison _______________________________________________ Suppor
Author: "Jerry Van Vlack" <jerryvv@roadrunner.com>
Date: Fri, 24 Apr 2009 06:42:46 -0400
Hello everyone Is there any advantage to pluging the tube that allows air to flow form one carb to the other on the webber manafold Pluging this hole would make each a true individual runner thanks r
Thanks to all that responded. The driveshaft is at the specialists being gone through and rebalanced. I'm having a Spitfire housing bored out to accept the larger GT6 bearing. I'm also working on the