Mail Archive Search: <+subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*\[Healeys\]\s+Aluminum\s+oil\s+pan\/sump\s*$/>

Results:

References: [ +subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*\[Healeys\]\s+Aluminum\s+oil\s+pan\/sump\s*$/: 6 ]

Total 6 documents matching your query.

1. [Healeys] Aluminum oil pan/sump (score: 1): Author: healeybn4@aol.com; Date: Mon, 13 Aug 2007 17:57:18 -0400; I installed an aluminum oil pan/sump on my 100-6 which was sourced through Moss, but was from AH Spares.??I removed the 1/4 inch of the oil pipe as instructed and re-installed the oil screen on the b; /html/healeys/2007-08/msg00174.html (7,889 bytes)
2. Re: [Healeys] Aluminum oil pan/sump (score: 1): Author: "Rich C" <richchrysler@quickclic.net>; Date: Mon, 13 Aug 2007 23:47:09 -0400; I had a car here that upon start up had similar high oil pressure readings. Turned out to be an air pocket in the oil line to the gauge. Rich Chrysler _______________________________________________; /html/healeys/2007-08/msg00176.html (8,886 bytes)
3. Re: [Healeys] Aluminum oil pan/sump (score: 1): Author: "Alan Seigrist" <healey.nut@gmail.com>; Date: Tue, 14 Aug 2007 13:33:23 +0800; At that pressure oil should be squirting out of the rocker when the engine is running. Take the rocker cover off and see if oil is squirting everywhere. If oil flow is normal, then I would have a loo; /html/healeys/2007-08/msg00180.html (8,389 bytes)
4. Re: [Healeys] Aluminum oil pan/sump (score: 1): Author: David Nock <healeydoc@sbcglobal.net>; Date: Tue, 14 Aug 2007 08:28:52 -0700; Did you check the length of the oil relief valve pipe. It usually needs to be shortened to clear the oil pan. David Nock British Car Specialists Stockton Ca 95205 209-948-8767 www.britishcarspecialis; /html/healeys/2007-08/msg00189.html (8,717 bytes)
5. [Healeys] Aluminum oil pan/sump (score: 1): Author: "Robert Bender" <rbender1@berkshire.rr.com>; Date: Tue, 14 Aug 2007 21:36:02 -0400; Hey Pete, Something else you might want to check - There is a notch in the pan gasket, that the oil travels in to get back in the pan from the oil pressure relief valve. As the valve is pushed back,; /html/healeys/2007-08/msg00196.html (8,329 bytes)
6. Re: [Healeys] Aluminum oil pan/sump (score: 1): Author: healeybn4@aol.com; Date: Mon, 27 Aug 2007 23:31:08 -0400; Thank you to all those who replied to my high oil pressure problem.? Bob Bender hit the problem right on the head!? The oil return from the pressure relief valve was blocked and restricted by?excess; /html/healeys/2007-08/msg00558.html (9,086 bytes)

Current List: 1 - 6
Page: [1]