- 1. [Healeys] BJ8 Shifter stuck (score: 1)
- Author: Michael Hartfield <hartfiel@alumni.princeton.edu>
- Date: Sun, 26 Oct 2008 17:57:36 -0700
- Somehow, I was attempting to find a gear in a parked position and locked the transmission into 3rd gear. The shifter swings back and forth but will not go up into 1st or down into 2nd. This is a BJ8.
- /html/healeys/2008-10/msg00441.html (7,210 bytes)
- 2. Re: [Healeys] BJ8 Shifter stuck (score: 1)
- Author: "Alan Seigrist" <healey.nut@gmail.com>
- Date: Mon, 27 Oct 2008 09:27:08 +0800
- It may be possible your clutch slave needs bleeding. First check your clutch fluid level, and if it's ok, then try pumping the clutch three or four times before putting the car into first or second.
- /html/healeys/2008-10/msg00443.html (7,649 bytes)
- 3. Re: [Healeys] BJ8 Shifter stuck (score: 1)
- Author: "John Snyder" <helyjohn@cablespeed.com>
- Date: Sun, 26 Oct 2008 18:50:47 -0700
- Same thing happened to me w/ my center shift BT7 MK2, except I was stuck in reverse. Very inconvenient Shift lever just flopped around, and would not engage anything. The small bottom "ball" of the s
- /html/healeys/2008-10/msg00444.html (8,353 bytes)
- 4. Re: [Healeys] BJ8 Shifter stuck (score: 1)
- Author: <tomfelts@windstream.net>
- Date: Mon, 27 Oct 2008 8:01:15 -0500
- ______________________________________- I've had the whole gear shift shaft come out in my hand. Stuffed it back in and drove on for a long time. shifting was pretty tough, but it was done effectivel
- /html/healeys/2008-10/msg00446.html (7,671 bytes)
- 5. Re: [Healeys] BJ8 Shifter stuck (score: 1)
- Author: Michael Hartfield <hartfiel@alumni.princeton.edu>
- Date: Mon, 27 Oct 2008 11:40:35 -0700
- Thanks for the advice. I manipulated the shifting lever with some force, and it slipped back into the proper place and is working now. Michael Hartfieldhartfiel@alumni.princeton.edu _________________
- /html/healeys/2008-10/msg00449.html (8,310 bytes)
This search system is powered by
Namazu