- 1. [Healeys] BJ8 window frames (score: 1)
- Author: "Herbert Miller" <hgmiller3@qwest.net>
- Date: Sun, 10 May 2009 09:48:13 -0500
- I am replacing the side window glass in my BJ8. What is used to secure the window frames to the glass? The archives yields posts referring to a rubber seal that is installed into the channel, then th
- /html/healeys/2009-05/msg00230.html (6,751 bytes)
- 2. Re: [Healeys] BJ8 window frames (score: 1)
- Author: "BJ8 Healeys" <sbyers@ec.rr.com>
- Date: Sun, 10 May 2009 14:00:37 -0400
- Do what I did after trying the crappy Moss rubber that did not swell: take it to your local glass shop. They can install the glass using modern materials. It cost me a total of $20 for both sides, w
- /html/healeys/2009-05/msg00237.html (7,970 bytes)
- 3. Re: [Healeys] BJ8 window frames (score: 1)
- Author: "randy dickson" <rdickson@midwestarchaeology.com>
- Date: Sun, 10 May 2009 16:54:42 -0500
- I did this on my BJ7 last winter and indeed, the Moss seals were too thick. I used thin 700c bicycle inner tubes, of which I had plent of lying around the garage. Worked great. Randy Healey Archaeolo
- /html/healeys/2009-05/msg00243.html (8,544 bytes)
- 4. Re: [Healeys] BJ8 window frames (score: 1)
- Author: Alan Seigrist <healey.nut@gmail.com>
- Date: Mon, 11 May 2009 06:28:28 +0800
- I used bicycle inner tubes and some black silicone sealant on both sides to set it in the channel. After cutting away the excess she looks like a factory installation. -- Sent from my mobile device A
- /html/healeys/2009-05/msg00244.html (8,278 bytes)
This search system is powered by
Namazu