Mail Archive Search: <+subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*\[Healeys\]\s+BN2\s+front\s+wheel\s+cylinder\s+size\s*$/>

Results:

References: [ +subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*\[Healeys\]\s+BN2\s+front\s+wheel\s+cylinder\s+size\s*$/: 7 ]

Total 7 documents matching your query.

1. [Healeys] BN2 front wheel cylinder size (score: 1): Author: Tadeusz Malkiewicz <tadeusz.malkiewicz@plusnet.pl>; Date: Sun, 04 May 2008 21:22:28 +0200; I have a quick question - what should be the size of the front wheel cylinders? The PO had an interesting variety installed: lest wheel 2x1", right wheel 1x1" and 1x7/8"... If I have to change them a; /html/healeys/2008-05/msg00105.html (7,041 bytes)
2. Re: [Healeys] BN2 front wheel cylinder size (score: 1): Author: "Alan Seigrist" <healey.nut@gmail.com>; Date: Mon, 5 May 2008 06:59:26 +0800; For the BN2 7/8" is original but some swear that the 1" used on BN1s gives a better brake distribution given that the BN2s rear brakes are actually bigger than the front brakes.. Alan -- Alan '52 A9; /html/healeys/2008-05/msg00113.html (8,158 bytes)
3. Re: [Healeys] BN2 front wheel cylinder size (score: 1): Author: Tadeusz Malkiewicz <tadeusz.malkiewicz@plusnet.pl>; Date: Mon, 05 May 2008 07:26:43 +0200; Hmmm.. This is very interesting.. I bought mine Volvo 1800S with wrong rear wheel cylinders in the rear - it had 1" instead of 7/8". The difference was so big, that the car was only braking with rear; /html/healeys/2008-05/msg00116.html (8,915 bytes)
4. Re: [Healeys] BN2 front wheel cylinder size (score: 1): Author: John Harper <ah@jharper.demon.co.uk>; Date: Mon, 5 May 2008 16:32:47 +0100; Sorry but I have to disagree. A BN2 should be 1" all round. It is the later BN1s with the hypoid, 5 stud rear axle and 2 1/4" wide read brakes that need the 7/8" diameter front wheel cylinders. A BN; /html/healeys/2008-05/msg00120.html (8,999 bytes)
5. Re: [Healeys] BN2 front wheel cylinder size (score: 1): Author: Tadeusz Malkiewicz <tadeusz.malkiewicz@plusnet.pl>; Date: Mon, 05 May 2008 17:54:42 +0200; Than there is something I do not quite understand.. When I look up the AHSpares catalog & Moss & Healey Part's catalog I get the following info: AH PN MOSS PN AHSpares 7H4583 021-149 BRK120 CYL-fron; /html/healeys/2008-05/msg00123.html (9,990 bytes)
6. Re: [Healeys] BN2 front wheel cylinder size (score: 1): Author: John Harper <ah@jharper.demon.co.uk>; Date: Mon, 5 May 2008 22:26:06 +0100; You are right to query this because I maintain that due to an omission on the original Austin-Healey 100 Parts list this error has been perpetuated. It will be extremely interesting to hear what oth; /html/healeys/2008-05/msg00132.html (9,631 bytes)
7. Re: [Healeys] BN2 front wheel cylinder size (score: 1): Author: healeyguy@aol.com; Date: Mon, 05 May 2008 18:53:35 -0400; I use the one inch bore front cylinders on?our 100. Its an early BN2 and best that I can tell had that size originally. I will say I have rebuilt or replaced a bunch of them since buying the car in 1; /html/healeys/2008-05/msg00135.html (10,298 bytes)

Current List: 1 - 7
Page: [1]