- 1. [Healeys] BN2 rear axle (score: 1)
- Author: "Thomas Willig" <twillig@ruda.de>
- Date: Thu, 17 Sep 2009 09:31:44 +0200
- After fitting the rear axle to my BN2, I found out that the threaded ends of the u-bolts protrude from the spring plate by over an 1". I think that this is a lot and it looks like there might be a ch
- /html/healeys/2009-09/msg00359.html (6,779 bytes)
- 2. Re: [Healeys] BN2 rear axle (score: 1)
- Author: "Rich C" <richchrysler@quickclic.net>
- Date: Thu, 17 Sep 2009 22:34:14 -0400
- I would not be cutting those U bolts down any shorter or you'll never get them back on a second time should you ever need to. Also have you made sure you have installed everything that should be the
- /html/healeys/2009-09/msg00373.html (8,540 bytes)
- 3. Re: [Healeys] BN2 rear axle (score: 1)
- Author: John Harper <ah@jharper.demon.co.uk>
- Date: Fri, 18 Sep 2009 08:01:22 +0100
- I seem to recall that one of the parts suppliers were selling the more readily available MG U bolts that were longer but could be cut down to the correct A-H length. Are your U bolts original or are
- /html/healeys/2009-09/msg00378.html (8,419 bytes)
- 4. Re: [Healeys] BN2 rear axle (score: 1)
- Author: "Thomas Willig" <twillig@ruda.de>
- Date: Fri, 18 Sep 2009 09:27:28 +0200
- they are replacements bought from A-H Spares a couple of years ago. would be interesting to get the length of the original bolts. Best regards Thomas --Urspr|ngliche Nachricht-- Von: John Harper [ma
- /html/healeys/2009-09/msg00379.html (8,627 bytes)
- 5. Re: [Healeys] BN2 rear axle (score: 1)
- Author: "Thomas Willig" <twillig@ruda.de>
- Date: Fri, 18 Sep 2009 13:17:25 +0200
- I was considering this also, but in this case I would get me some new u-bolts. I have installed everything correctly according to the partslist, but there might be the case that the new u-bolts that
- /html/healeys/2009-09/msg00380.html (9,127 bytes)
This search system is powered by
Namazu