- 1. [Healeys] Engine Won't Start (score: 1)
- Author: "Steve" <stevesylvia2@comcast.net>
- Date: Sun, 24 May 2009 16:12:12 -0500
- Hi All, We'll after three years I am finally able to try and start my engine. It ran fine before I pulled it. While it was out, all I did was replace gaskets, distributor cap, points, plugs, condense
- /html/healeys/2009-05/msg00585.html (7,929 bytes)
- 2. Re: [Healeys] Engine Won't Start (score: 1)
- Author: "Rich C" <richchrysler@quickclic.net>
- Date: Sun, 24 May 2009 18:13:55 -0400
- You have no doubt removed the distributor drive shaft far enough to disengage the gear teeth from the camshaft. When it went back down it dropped into a different tooth position. Start over by bring
- /html/healeys/2009-05/msg00586.html (9,366 bytes)
- 3. Re: [Healeys] Engine Won't Start (score: 1)
- Author: Alan Seigrist <healey.nut@gmail.com>
- Date: Mon, 25 May 2009 07:01:27 +0800
- It is very easy to swap the drive dog for the dizzy into being 180 deg out from the twenty-two position. Check the drive dog, I bet it's 180 deg out. Alan -- Sent from my mobile device Alan '52 A90
- /html/healeys/2009-05/msg00589.html (8,871 bytes)
This search system is powered by
Namazu