I have a 1967 Cortina which has two different sets of wheel bearings listed for this year. I have measure the old bearings and know that they are 19mm inside for the small bearing and 28.58 for the
If you give the exact dimensions in mm you can look it up in the on-line catalog of SKF or any of the other manufacturers. Is it UK or German built? Kees Oudesluijs NL [demime 1.01d removed an attach
Sorry I missed the date of manufacture of the car. This is not German built. Kees Oudesluijs NL [demime 1.01d removed an attachment of type text/x-vcard which had a name of coudesluijs.vcf] _________
Actually it is easier than that. Give the parts guy the numbers off the bearings and he can look them up direct. Or if you want to save a couple of bucks go to a bearing house and give them the numbe
UK built. the body tag actually says 1965, but the car is a 1967. If you give the exact dimensions in mm you can look it up in the on-line catalog of SKF or any of the other manufacturers. Is it UK o
Jerry, I found this cross reference at a Timken site that says you need "Set 2" and "Set 21" for Timken or "A-2" & "A-21" for Federal-Mogul. Chicago Rawhide would be "BR2" & "BR21". I have an old SKF