- 1. [Land-speed] Bearing clearance (score: 1)
- Author: "John Burk" <joyseydevil@comcast.net>
- Date: Mon, 10 May 2010 16:56:06 -0400
- For a 427 stroke , 7500 rpm and the lighter oil everybody uses what sort of bearing clearance works at Bonneville . John Burk _______________________________________________ Land-speed@autox.team.net
- /html/land-speed/2010-05/msg00043.html (6,737 bytes)
- 2. Re: [Land-speed] Bearing clearance (score: 1)
- Author: "John Burk" <joyseydevil@comcast.net>
- Date: Mon, 10 May 2010 22:40:20 -0400
- _______________________________________________ Land-speed@autox.team.net Donate: http://www.team.net/donate.html Archive: http://www.team.net/archive Forums: http://www.team.net/forums
- /html/land-speed/2010-05/msg00046.html (7,001 bytes)
- 3. Re: [Land-speed] Bearing clearance (score: 1)
- Author: Skip Higginbotham <saltrat@pahrump.com>
- Date: Tue, 11 May 2010 16:53:56 -0700
- More important than clearances is oil volume. If you run a dry sump system, you're fine. But if you run a wet sump, be sure to have at least 12 quarts of oil or one of the newer blocks that have prio
- /html/land-speed/2010-05/msg00047.html (8,317 bytes)
- 4. Re: [Land-speed] Bearing clearance (score: 1)
- Author: drmayf <drmayf@mayfco.com>
- Date: Tue, 11 May 2010 17:48:07 -0700
- "bearings are bearings"....yeah you'd think so, but them you'd probably be wrong! I can loan you a good book on tribology should you be inclined. Journal size makes a difference, how the oil is deliv
- /html/land-speed/2010-05/msg00048.html (9,746 bytes)
- 5. Re: [Land-speed] Bearing clearance (score: 1)
- Author: drmayf <drmayf@mayfco.com>
- Date: Tue, 11 May 2010 17:50:40 -0700
- OOps! Forgot something... 10 psig for every hundred hp? So a 1300 hp motor should have 130 psig? a 2500 hp one have 250 psig? I though the rule was 10 psig for every 1000 rpm. mayf __________________
- /html/land-speed/2010-05/msg00049.html (9,197 bytes)
- 6. Re: [Land-speed] Bearing clearance (score: 1)
- Author: Bryan Savage <b.a.savage@wildblue.net>
- Date: Mon, 31 May 2010 10:04:38 -0700
- The closer you can get to 100% oil, the better your results will be. Excessive oil pressure just soaks up HP and heats the oil. Bryan _______________________________________________ Land-speed@autox.
- /html/land-speed/2010-05/msg00111.html (9,748 bytes)
- 7. Re: [Land-speed] Bearing clearance (score: 1)
- Author: "Dave Dahlgren" <ddahlgren@snet.net>
- Date: Mon, 31 May 2010 13:26:22 -0400
- With all due respect I think bearing width diameter and surface speed all matter to clearance and oil.. Dave -- Original Message -- From: "Bryan Savage" <b.a.savage@wildblue.net> To: "Skip Higginboth
- /html/land-speed/2010-05/msg00113.html (9,037 bytes)
- 8. Re: [Land-speed] Bearing clearance (score: 1)
- Author: "Neil Albaugh" <neil@dbelltech.com>
- Date: Mon, 31 May 2010 12:43:34 -0700
- I think you're right Dave. I'd check with the bearing manufacturer for his Regards, Neil Tucson, AZ -- From: "Dave Dahlgren" <ddahlgren@snet.net> Sent: Monday, May 31, 2010 10:26 AM To: "Bryan Savage
- /html/land-speed/2010-05/msg00114.html (9,517 bytes)
This search system is powered by
Namazu