- 1. Re: [Mgs] Poly Bushings in MGB upper trunnion (score: 1)
- Author: "Ed Woods" <fogbro1@comcast.net>
- Date: Wed, 10 Oct 2007 22:07:44 -0400
- This evening I pressed out the two rubber bushings in the upper trunnion, the pieces that fit between the shock arms. Each half had a steel sleeve which fit snugly over the shouldered bolt that bind
- /html/mgs/2007-10/msg00105.html (6,886 bytes)
- 2. Re: [Mgs] Poly Bushings in MGB upper trunnion (score: 1)
- Author: Paul Root <ptrmgb@gmail.com>
- Date: Wed, 10 Oct 2007 22:21:34 -0500
- I'd say if the instructions say to use them, that you should use them. I think I missed that this was the upper trunnion before. I was thinking the a-arms. Which the V8 bushes have them but not the p
- /html/mgs/2007-10/msg00106.html (8,275 bytes)
- 3. Re: [Mgs] Poly Bushings in MGB upper trunnion (score: 1)
- Author: "Councill, David" <dcouncill@msubillings.edu>
- Date: Wed, 10 Oct 2007 22:42:28 -0600
- I would suspect wrong bushings or bolt. The poly bushings do not use the sleeve and the bolt should be a snug fit. I have changed two pairs of front shocks to the poly bushings. It's a snug but not o
- /html/mgs/2007-10/msg00107.html (8,822 bytes)
- 4. Re: [Mgs] Poly Bushings in MGB upper trunnion (score: 1)
- Author: "Paul Hunt" <paul.hunt1@blueyonder.co.uk>
- Date: Thu, 11 Oct 2007 09:31:01 +0100
- Press the steel sleeves in the poly bushes before pressing the poly bushes into the trunnion, seems to be the way to go. PaulH. -- Original Message -- _______________________________________________
- /html/mgs/2007-10/msg00109.html (7,475 bytes)
This search system is powered by
Namazu