Author: "Matthew A. Smith" <matthews517@earthlink.net>
Date: Tue, 1 Jul 2008 21:09:36 -0400
You know the one. That nut behind the rear header tube, under the back Solex. It's too far to reach from the front, snaking your arm under the carbs. The starter is in the way to do it from below. I
isn't this where that funny curved wrench comes into play? ________________________________________ Support Team.Net http://www.team.net/donate.html Datsun-roadsters mailing list http://www.team.net/
I usually use a yoga position called "embracing the carbs" for this. You're right, you can't really do it with either hand, BUT... If you lean over the engine from the carb side, run one hand behind
With my SUs and a header on a U20, my problem is getting to the left (forward) nut on the #4 cylinder exhaust tube. I can't get a box-end wrench, nor an open-end wrench, on the %%$#@$^&* thing with e
That is the nut where I got stuck once. I thought I was going to have to gnaw my arm off like a raccoon in a trap. My cell phone was just far enough away that I couldn't reach it or I would have call
Also known as a "monkey-trap" or in this case, a "grease-monkey-trap." Gordon Glasgow --Original Message-- From: datsun-roadsters-bounces+gsglasgow=comcast.net@autox.team.net [mailto:datsun-roadsters
A couple options for you are "S" wrenches or Half Moon Wrenches. http://buy1.snapon.com/catalog/tools.asp?tool=hand&Group_ID=548&store=snapon-store http://buy1.snapon.com/catalog/tools.asp?tool=hand&
Craftsman makes an open end wrench with an odd cut in one edge that allows you to rock it back and forth; almost like a ratchet. Combine that with Cathy Ann's small hands and that middle bolt comes o
The general drill for installing the carbs and intake is: Install the manifold with out carbs and heat shield. This allows best access to the various nuts. Install the heat shield. Install the carbs.
Years ago, first Roadster, in my parent's driveway in Suburbia, I was putting the manifold on, had both arms semi stuck under the manifold, face sideways on the valve cover....Who walks up and starts